EUVIMEDEUVIMED entdecken
Crossref

In Situ Detection of Ferromagnetic Wear Debris for Machinery Condition Monitoring

Jiangfeng Lu, Jinbo Qiu, Cong Liu, Shuotian Sun, Yanfeng Lu, Xiang Sun

IEEE Sensors Journal · 15.05.2026 · 26 (10) · 16158-16167

DOI: 10.1109/jsen.2026.3680571 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.05.2026. Verfasst von Jiangfeng Lu und 5 weiteren Autor:innen. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In machinery maintenance, wear debris analysis is extensively utilized to assess critical component conditions and predict early failures in oil-wetted systems. Analyzing particles suspended in lubricants, it reveals the type, severity, and origin of wear, enabling timely differentiation between normal operation, abnormal degradation, and impending failure. This article presents an in situ ferromagnetic wear debris sensor designed to continuously monitor ferrous particles in lubrication circuits. The sensor exploits magnetic field perturbations induced by both magnetization and eddy-current effects, enabling simultaneous sensitivity to micro-scale debris and discrimination of macroscale particles. This dual-response mechanism effectively overcomes the inductance stagnation zone commonly encountered in conventional inductive debris sensors, ensuring continuous sensitivity across the particle size transition regime. Theoretical modeling and finite-element simulations establish the distinct electromagnetic responses of different particle types and sizes, which form the basis for debris quantification. Experimental results demonstrate reliable detection of ferromagnetic debris over a broad size range from approximately 100 $\mu$ m to 3 mm. For fine particles, the sensor achieves a minimum detectable mass of 0.25–0.35 mg, with a sensitivity of approximately −120 to −150 Hz/mg and a linearity exceeding R2 = 0.96. For coarse particles, combined inductance and resistance variations provide clear differentiation of millimeter-scale debris. Furthermore, Gaussian mixture model (GMM) clustering is applied to multiscale signal features, enabling classification of oil contamination into benign wear, early severe wear, advanced failure, and catastrophic failure stages, with an overall accuracy of 92.43%. The proposed sensor provides a practical and cost-effective solution for real-time wear monitoring and prognostics and health management (PHM) of industrial equipment lubrication systems.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lu, J., Qiu, J., Liu, C., Sun, S., Lu, Y., & Sun, X. (2026). In Situ Detection of Ferromagnetic Wear Debris for Machinery Condition Monitoring. IEEE Sensors Journal, 26(10), 16158-16167. https://doi.org/10.1109/jsen.2026.3680571

Vancouver

Lu J, Qiu J, Liu C, Sun S, Lu Y, Sun X. In Situ Detection of Ferromagnetic Wear Debris for Machinery Condition Monitoring. IEEE Sensors Journal. 2026;26(10):16158-16167. doi:10.1109/jsen.2026.3680571

BibTeX
@article{Lu2026,
  author = {Lu, Jiangfeng and Qiu, Jinbo and Liu, Cong and Sun, Shuotian and Lu, Yanfeng and Sun, Xiang},
  title = {In Situ Detection of Ferromagnetic Wear Debris for Machinery Condition Monitoring},
  journal = {IEEE Sensors Journal},
  year = {2026},
  volume = {26},
  number = {10},
  pages = {16158--16167},
  doi = {10.1109/jsen.2026.3680571}
}
Kostenlos starten →