A Passive Software-Defined Radio-Based mmWave Sensing System for Blind Integrated Communication and Sensing
IEEE Sensors Journal · 01.05.2026 · 26 (9) · 13796-13809
DOI: 10.1109/jsen.2026.3671476 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.05.2026. Verfasst von Shiqi Liu und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Japan Science and Technology Agency (JST), PRESTO, Suematsu Award, Institute of Science Tokyo; and in part by Japan Society for the Promotion of Science (JSPS) KAKENHI.
Abstract (Originalsprache)
Integrated sensing and communication (ISAC) is considered a key component of future 6G technologies, especially in the millimeter-wave (mmWave) bands. Recently, the performances of ISAC were experimentally evaluated and demonstrated in various scenarios by developing ISAC systems. These systems generally consist of coherent transmitter (Tx) and receiving (Rx) modules. However, actively transmitting radio waves for experiments is not easy due to regulatory restrictions of radio. Meanwhile, the Tx/Rx should be synchronized and Rx need the information of Tx. In this article, a fully passive mmWave sensing system is developed with software-defined radio (SDR) for blind ISAC. It only consists of a passive Rx module which does not depend on the Tx. Since the proposed system is not synchronized with Tx and has no knowledge of the transmitted signals, a differential structure with two oppositely oriented receivers is introduced to realize the sensing function. This structure can mitigate the influences of unknown source signals and other distortions. With the proposed sensing system, the ambient mmWave communication signals are leveraged for sensing without interrupting the existing systems. It can be deployed for field applications such as signal detection and dynamic human activity recognition since it does not emit signals. The efficacy of the developed system is first verified with a metallic plate with known motion pattern. The measured Doppler spectrogram shows good agreement with the simulation results, demonstrating the correctness of the sensing results. Further, the system is evaluated in complex scenarios, including handwaving, single- and multiperson motion detection. The sensing results successfully reflect the corresponding motions, demonstrating that the proposed sensing system can be utilized for blind ISAC in various applications.
Förderung
- Japan Science and Technology Agency (JST), PRESTO
- Suematsu Award, Institute of Science Tokyo; and in part by Japan Society for the Promotion of Science (JSPS) KAKENHI
Zitieren
APA
Liu, S., Song, H., Wei, B., Keerativoranan, N., & Takada, J. (2026). A Passive Software-Defined Radio-Based mmWave Sensing System for Blind Integrated Communication and Sensing. IEEE Sensors Journal, 26(9), 13796-13809. https://doi.org/10.1109/jsen.2026.3671476
Vancouver
Liu S, Song H, Wei B, Keerativoranan N, Takada J. A Passive Software-Defined Radio-Based mmWave Sensing System for Blind Integrated Communication and Sensing. IEEE Sensors Journal. 2026;26(9):13796-13809. doi:10.1109/jsen.2026.3671476
BibTeX
@article{Liu2026,
author = {Liu, Shiqi and Song, Hang and Wei, Bo and Keerativoranan, Nopphon and Takada, Jun-Ichi},
title = {A Passive Software-Defined Radio-Based mmWave Sensing System for Blind Integrated Communication and Sensing},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {9},
pages = {13796--13809},
doi = {10.1109/jsen.2026.3671476}
}
EUVIMED