Sustainable Poly(lactic acid) Smart Mattress Surface Fabrics With Integrated Capacitive Sensors for Real-Time Sleep Monitoring
IEEE Sensors Journal · 15.05.2026 · 26 (10) · 15076-15085
DOI: 10.1109/jsen.2026.3667922 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.05.2026. Verfasst von Zixin Ju und 3 weiteren Autor:innen. Gefördert von: Innovation and Technology Commission of the Government of Hong Kong Special Administrative Region under the Innovation and Technology Fund Project, Research Centre of Textiles for Future Fashion at The Hong Kong Polytechnic University.
Abstract (Originalsprache)
Smart mattress surface fabrics for real-time sleep monitoring have attracted significant interest, yet scalable and eco-friendly fabrication methods remain underdeveloped. In this work, a textile capacitive pressure sensor (TCPS) was seamlessly integrated into poly(lactic acid) (PLA) weft-knit inlaid fabrics using a single-step intarsia knitting technique, eliminating the need for postlamination or adhesives. The fabricated TCPS exhibited high sensitivity (1.73–0.09 $kPa^{-{1}}$ across 0–15 kPa), outperforming many previously reported textile-based capacitive sensors, while maintaining stable sensing performance under varied compressive pressures, compression rates, and repeated washing. The TCPS showed a hysteresis error of 14.02% at 6 kPa and maintained high repeatability over 5000 compression cycles at 15 kPa. Environmental tests indicated that baseline drift was mainly influenced by humidity, whereas the capacitance change ratio ( $\Delta {C}/{C}_{{0}}$ ) remained relatively stable. In addition, the PLA-based TCPS fabric demonstrated superior comfort properties, including thermal insulation, air permeability, and water vapor permeability, compared to commercial mattress surface fabrics. Furthermore, a $4\times 4$ TCPS array was embedded into the PLA fabric and wirelessly interfaced with a data acquisition module to acquire and record capacitance signals in real time for sleep monitoring. As a proof-of-concept demonstration, an offline deep learning model achieved an overall accuracy of 88.2% for classifying five typical sleep behaviors and 96% for identifying ten participants, validated under strict leave-one-subject-out (LOSO) and stratified 70/30 protocols, respectively. This work presents a promising and scalable route to sustainable smart textile systems for personalized sleep monitoring.
Förderung
- Innovation and Technology Commission of the Government of Hong Kong Special Administrative Region under the Innovation and Technology Fund Project
- Research Centre of Textiles for Future Fashion at The Hong Kong Polytechnic University
Zitieren
APA
Ju, Z., Dong, S., Liu, Y., & Hu, H. (2026). Sustainable Poly(lactic acid) Smart Mattress Surface Fabrics With Integrated Capacitive Sensors for Real-Time Sleep Monitoring. IEEE Sensors Journal, 26(10), 15076-15085. https://doi.org/10.1109/jsen.2026.3667922
Vancouver
Ju Z, Dong S, Liu Y, Hu H. Sustainable Poly(lactic acid) Smart Mattress Surface Fabrics With Integrated Capacitive Sensors for Real-Time Sleep Monitoring. IEEE Sensors Journal. 2026;26(10):15076-15085. doi:10.1109/jsen.2026.3667922
BibTeX
@article{Ju2026,
author = {Ju, Zixin and Dong, Shanshan and Liu, Yanping and Hu, Hong},
title = {Sustainable Poly(lactic acid) Smart Mattress Surface Fabrics With Integrated Capacitive Sensors for Real-Time Sleep Monitoring},
journal = {IEEE Sensors Journal},
year = {2026},
volume = {26},
number = {10},
pages = {15076--15085},
doi = {10.1109/jsen.2026.3667922}
}
EUVIMED