EUVIMEDEUVIMED entdecken
Crossref

A MEMS IMU-Based Air-Propelled Positioning Ball for Small-Diameter Underground Pipeline Localization

Xiaoji Niu, Jundong Hu, Qijin Chen, Dong Zhao

IEEE Sensors Journal · 15.05.2025 · 25 (10) · 18257-18267

DOI: 10.1109/jsen.2025.3555335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.05.2025. Verfasst von Xiaoji Niu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Open Project Fund of the National Engineering Research Center for Digital Construction and Evaluation Technology of Urban Rail Transit, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate locating of small-diameter underground pipelines (typically 20–65 mm) is crucial for avoiding or minimizing the damage during urban construction and improving maintenance efficiency. However, conventional pipeline inspection Gauges (PIGs) equipped with high-grade inertial measurement units (IMUs), which are primarily designed for normal size pipeline, cannot access small diameter or tightly curved pipelines due to their large overall size and the large-sized high-precision IMUs they rely on. This limitation leaves a critical gap in accurately locating such pipelines, as no effective method currently exists for their precise positioning. To address this challenge, we propose a novel method using an air-propelled inertial positioning ball (IPB) integrated with a chip-level micro-electromechanical systems (MEMS) IMU, so as to make the device compact and lightweight enough to traverse the small-diameter pipelines. However, it comes with a serious problem that the MEMS IMU chip has large sensor errors leading to fast position drift and therefore can only keep positioning accuracy for several seconds. Unlike the conventional PIGs, which are typically pulled through pipelines by steel cables at a low speed (around 1 m/s), the lightweight IPB is designed to be propelled by airflow, allowing it to fly rapidly (around 10 m/s) through the pipeline. This significantly reduces the integration time of the MEMS IMU, thereby mitigating its cumulative errors effectively. Field tests conducted in a 48-m-long small-diameter pipe demonstrate the effectiveness of the IPB, with single-run positioning errors of 0.77 m in the transverse direction and 1.13 m in the height direction. By averaging the results from four independent runs, the maximum positioning errors were reduced to 0.36 m (0.75% of pipe length) in the transverse direction and 0.36 m (0.75% of pipe length) in the height direction. The proposed new approach provides a practical, efficient, and accurate solution for locating small-diameter and tightly curved underground pipelines, addressing a critical gap in underground pipeline surveying.

Förderung

  • National Natural Science Foundation of China
  • Open Project Fund of the National Engineering Research Center for Digital Construction and Evaluation Technology of Urban Rail Transit, China

Zitieren

APA

Niu, X., Hu, J., Chen, Q., & Zhao, D. (2025). A MEMS IMU-Based Air-Propelled Positioning Ball for Small-Diameter Underground Pipeline Localization. IEEE Sensors Journal, 25(10), 18257-18267. https://doi.org/10.1109/jsen.2025.3555335

Vancouver

Niu X, Hu J, Chen Q, Zhao D. A MEMS IMU-Based Air-Propelled Positioning Ball for Small-Diameter Underground Pipeline Localization. IEEE Sensors Journal. 2025;25(10):18257-18267. doi:10.1109/jsen.2025.3555335

BibTeX
@article{Niu2025,
  author = {Niu, Xiaoji and Hu, Jundong and Chen, Qijin and Zhao, Dong},
  title = {A MEMS IMU-Based Air-Propelled Positioning Ball for Small-Diameter Underground Pipeline Localization},
  journal = {IEEE Sensors Journal},
  year = {2025},
  volume = {25},
  number = {10},
  pages = {18257--18267},
  doi = {10.1109/jsen.2025.3555335}
}
Kostenlos starten →