EUVIMEDEUVIMED entdecken
Crossref

Ultrathin GPU/CNTs@Ag Electrospun Fibers for Use as Strain/Piezoresistive Flexible Wearable Sensors

Ruiyong Yang, Yongling Wu, Mingming Liu, Hongyu Zheng

IEEE Sensors Journal · 15.05.2025 · 25 (10) · 17072-17084

DOI: 10.1109/jsen.2025.3554561 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.05.2025. Verfasst von Ruiyong Yang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, Taishan Project of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon-based nanomaterials are excellent candidates for constructing conductive sensing networks in a flexible polymer matrix, which is widely used. However, it remains a challenge to improve the flexibility and sensitivity of multifunctional sensor by synergistically combining several conductive materials in the sensor fabrication processes. In this study, graphene (GR)-dopped thermoplastic polyurethane (TPU) GPU was adopted as the matrix material with surface grafting of carbon nanotubes (CNTs) and silver nanoparticles (Ag) for fabricating fibrous membranes by electrospinning and ultrasonic adsorption. Then, GPU/CNTs@Ag-based sensors were made and tested for their piezoresistive and strain sensing properties. The results showed that GR and Ag nanoparticles increased the initial piezoresistance response, and the piezoresistive sensor had the sensitivity of 0.08 kPa ${}^{-{1}}$ within 0–6 kPa with the response/recovery time of 15/35 ms. The strain sensor performed well up to 400% deformation with a gauge factor (GF) of 349.8 and a response/recovery time of 68/199 ms. The sensors had stability for more than 5000 cycles. The sensors showed excellent detection of human body movements, including limb motion, respiration, and muscle rhythm. A $4\times 4$ piezoresistive array was fabricated and the corresponding data acquisition system has been developed to monitor the real-time signals of external stress distribution. Therefore, the GPU/CNTs@Ag sensors fabricated with the novel design strategy demonstrated considerable prospective applications such as human motion detection, smart skin, and machine haptics.

Förderung

  • Natural Science Foundation of Shandong Province
  • Taishan Project of Shandong Province

Zitieren

APA

Yang, R., Wu, Y., Liu, M., & Zheng, H. (2025). Ultrathin GPU/CNTs@Ag Electrospun Fibers for Use as Strain/Piezoresistive Flexible Wearable Sensors. IEEE Sensors Journal, 25(10), 17072-17084. https://doi.org/10.1109/jsen.2025.3554561

Vancouver

Yang R, Wu Y, Liu M, Zheng H. Ultrathin GPU/CNTs@Ag Electrospun Fibers for Use as Strain/Piezoresistive Flexible Wearable Sensors. IEEE Sensors Journal. 2025;25(10):17072-17084. doi:10.1109/jsen.2025.3554561

BibTeX
@article{Yang2025,
  author = {Yang, Ruiyong and Wu, Yongling and Liu, Mingming and Zheng, Hongyu},
  title = {Ultrathin GPU/CNTs@Ag Electrospun Fibers for Use as Strain/Piezoresistive Flexible Wearable Sensors},
  journal = {IEEE Sensors Journal},
  year = {2025},
  volume = {25},
  number = {10},
  pages = {17072--17084},
  doi = {10.1109/jsen.2025.3554561}
}
Kostenlos starten →