EUVIMEDEUVIMED entdecken
Crossref

Differential Colorimetric pH Measurement With a Microfluidic Chip Using a Novel Sample Injection Method

Senol Mutlu, Ismail Terkesli

IEEE Sensors Journal · 15.10.2024 · 24 (20) · 33001-33010

DOI: 10.1109/jsen.2024.3405085 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.10.2024. Verfasst von Senol Mutlu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Eliar Elektronik San. A.S. as a Research Project through Bogazici University Technology Transfer Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a novel approach to pH measurement of colored liquids using differential optical absorption measurements within a microfluidic chip and a novel sample injection method. Sample is automatically introduced and mixed with a pH indicator solution by coupling the mechanical motion of a syringe pump to two syringes with different cross-sectional areas. Predefined and consistent mixing ratios are confirmed using a Y-shaped microfluidic chip. The dynamic performance of the injection method is also optimized to eliminate flow fluctuations using an electrical circuit analogy and conducting electrical simulations. A polymethyl methacrylate (PMMA) microfluidic chip with a passive micromixer and two observation windows is also fabricated. The mixing capability of the chip is tested by introducing samples with different color dye concentrations ranging from 150 to $450~\mu $ L/L at a flow rate of $15~\mu $ L/min. Absorbances are measured from observation windows before and after mixing the colored sample with DI water, confirming uniform and consistent mixing ratio of 2:1 of colored sample to DI water. Finally, pH measurements of colored samples are made. Phenol red pH indicator is introduced at a flow rate of $15~\mu $ L/min and mixed with colored samples of varying pH values between 5.5 and 8.5 and sample to color dye volume ratio of 600:1, 600:4, and 600:8. The effect of the color of the sample is eliminated by differential absorbance measurements, before and after the colored sample is mixed with the pH indicator, revealing a linear response with the experimented pH values.

Förderung

  • Eliar Elektronik San. A.S. as a Research Project through Bogazici University Technology Transfer Office

Zitieren

APA

Mutlu, S., & Terkesli, I. (2024). Differential Colorimetric pH Measurement With a Microfluidic Chip Using a Novel Sample Injection Method. IEEE Sensors Journal, 24(20), 33001-33010. https://doi.org/10.1109/jsen.2024.3405085

Vancouver

Mutlu S, Terkesli I. Differential Colorimetric pH Measurement With a Microfluidic Chip Using a Novel Sample Injection Method. IEEE Sensors Journal. 2024;24(20):33001-33010. doi:10.1109/jsen.2024.3405085

BibTeX
@article{Mutlu2024,
  author = {Mutlu, Senol and Terkesli, Ismail},
  title = {Differential Colorimetric pH Measurement With a Microfluidic Chip Using a Novel Sample Injection Method},
  journal = {IEEE Sensors Journal},
  year = {2024},
  volume = {24},
  number = {20},
  pages = {33001--33010},
  doi = {10.1109/jsen.2024.3405085}
}
Kostenlos starten →