EUVIMEDEUVIMED entdecken
Crossref

AWideband Frequency Beam-Scanning Antenna Array for Millimeter-Wave Industrial Wireless Sensing Applications

Abdul Jabbar, Jalil Ur-Rehman Kazim, Zhibo Pang, Muhammad Ali Babar Abbasi, Qammer H. Abbasi, Muhammad Ali Imran, Masood Ur-Rehman

IEEE Sensors Journal · 15.04.2024 · 24 (8) · 13315-13325

DOI: 10.1109/jsen.2024.3370135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.04.2024. Verfasst von Abdul Jabbar und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Innovative and Collaborative Research Grant under Pakistan-UK Education Gateway, Deforestation in Pakistan: Combating through Wireless Sensor Networks.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 57–71-GHz millimeter-wave (mmWave) industrial, scientific, and medical (ISM) band holds significant potential for enhancing the performance of next-generation industrial wireless applications. This article first presents the design and analysis of a compact and high-performance eight-element series-fed frequency beam-scanning array designed to cover the entire 21.87% fractional bandwidth (FBW) of the 57–71-GHz ISM band. Using this as a subarray, a hybrid parallel–series feed topology is designed to construct a 64-element ( $8\times8$ ) planar array with high-gain directional beams. The planar array provides a peak measured gain of 20.12 dBi at 64 GHz and maintains a flat gain of over 19.23 dBi throughout the band, with a 1-dB gain bandwidth of 13 GHz. Its narrow directional beams provide an average half-power beamwidth (HPBW) of 9.7° and 11.78° in the elevation and azimuth planes, respectively, facilitating point-to-point mmWave connectivity and high-resolution beam scanning. The inherent phase variation of the series-fed topology is employed to produce a beam-scanning range of 40° within the 57–71-GHz band, with a scan loss of less than 1 dB. The proposed array is a low-cost and reproducible solution for seamless integration with V-band mmWave equipment, as elucidated through practical demonstration frameworks using the mmWave power sensor and EK1HMC6350 evaluation board. The proposed array is well-suited for emerging industrial wireless sensing and imaging applications, and mmWave frequency scanning radars. Its versatility extends to various 60-GHz protocols, such as IEEE 802.11ay, IEEE 802.11ad, IEEE 802.15.3c/d, and WirelessHD, and other customized industrial protocols such as WirelessHP.

Förderung

  • Innovative and Collaborative Research Grant under Pakistan-UK Education Gateway
  • Deforestation in Pakistan: Combating through Wireless Sensor Networks

Zitieren

APA

Jabbar, A., Kazim, J. U., Pang, Z., Abbasi, M. A. B., Abbasi, Q. H., Imran, M. A., & Ur-Rehman, M. (2024). AWideband Frequency Beam-Scanning Antenna Array for Millimeter-Wave Industrial Wireless Sensing Applications. IEEE Sensors Journal, 24(8), 13315-13325. https://doi.org/10.1109/jsen.2024.3370135

Vancouver

Jabbar A, Kazim JU, Pang Z, Abbasi MAB, Abbasi QH, Imran MA, et al. AWideband Frequency Beam-Scanning Antenna Array for Millimeter-Wave Industrial Wireless Sensing Applications. IEEE Sensors Journal. 2024;24(8):13315-13325. doi:10.1109/jsen.2024.3370135

BibTeX
@article{Jabbar2024,
  author = {Jabbar, Abdul and Kazim, Jalil Ur-Rehman and Pang, Zhibo and Abbasi, Muhammad Ali Babar and Abbasi, Qammer H. and Imran, Muhammad Ali and Ur-Rehman, Masood},
  title = {AWideband Frequency Beam-Scanning Antenna Array for Millimeter-Wave Industrial Wireless Sensing Applications},
  journal = {IEEE Sensors Journal},
  year = {2024},
  volume = {24},
  number = {8},
  pages = {13315--13325},
  doi = {10.1109/jsen.2024.3370135}
}
Kostenlos starten →