EUVIMEDEUVIMED entdecken
Crossref

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Dongying Chen, Qiang Zhao, Dawei Du, Yunzhou Li, Shixuan Liu, Juncheng Wang

IEEE Sensors Journal · 01.03.2024 · 24 (5) · 6201-6206

DOI: 10.1109/jsen.2024.3350123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.03.2024. Verfasst von Dongying Chen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Key Research and Development Program of Shandong Province, China, National Key Research and Development Program of China, Science and Technology Innovation Project of Laoshan Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber Bragg grating (FBG) has been widely used in many fields for the measurement of temperature, strain, and other parameters, but single-mode FBG has a cross-sensitivity problem between temperature and strain. In this article, a new scheme is proposed to solve the problem by using parallel core–cladding FBGs, whose grating areas are located at the interface region of the core and cladding of the fiber. The sensing principle of parallel core–cladding FBGs for the simultaneous measurement of temperature and strain is theoretically analyzed. The femtosecond laser point-by-point method of the parallel core–cladding FBGs is experimentally investigated. Two parallel FBGs, namely, core FBG and cladding FBG, are formed efficiently and conveniently by a single time inscription. Two transmission peaks have been observed, which are excited by the core mode and the cladding mode. The experiment results demonstrated that the proposed compact sensor can detect the temperature with sensitivity of 11.043 pm/°C and strain with sensitivity of 1.2101 pm/ $\mu \varepsilon $ up to $1.114\times 103\,\,\mu \varepsilon $ , and the relative errors of temperature and strain are less than 5.8% and 8.3%, respectively. The proposed parallel core–cladding FBGs are much more compact as one FBG element compared with the conventional structure with two cascaded FBGs or parallel FBGs. The parallel core–cladding FBGs can overcome the cross-sensitivity problem of single-mode FBG, which has great application value and potential in fiber sensing fields for dual-parameter.

Förderung

  • Key Research and Development Program of Shandong Province, China
  • National Key Research and Development Program of China
  • Science and Technology Innovation Project of Laoshan Laboratory
  • National Natural Science Foundation of China
  • Taishan Scholars Project Special Fund
  • Natural Science Foundation of Shandong Province, China
  • Major Innovation Special Project of Qilu University of Technology (Shandong Academy of Sciences) Science Education Industry Integration Pilot Project
  • Postdoctoral Funded Project Qingdao City, Shandong Province, China

Zitieren

APA

Chen, D., Zhao, Q., Du, D., Li, Y., Liu, S., & Wang, J. (2024). Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method. IEEE Sensors Journal, 24(5), 6201-6206. https://doi.org/10.1109/jsen.2024.3350123

Vancouver

Chen D, Zhao Q, Du D, Li Y, Liu S, Wang J. Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method. IEEE Sensors Journal. 2024;24(5):6201-6206. doi:10.1109/jsen.2024.3350123

BibTeX
@article{Chen2024,
  author = {Chen, Dongying and Zhao, Qiang and Du, Dawei and Li, Yunzhou and Liu, Shixuan and Wang, Juncheng},
  title = {Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method},
  journal = {IEEE Sensors Journal},
  year = {2024},
  volume = {24},
  number = {5},
  pages = {6201--6206},
  doi = {10.1109/jsen.2024.3350123}
}
Kostenlos starten →