EUVIMEDEUVIMED entdecken
Crossref

Bolt-Loosening Identification by Using Empirical Mode Decomposition and Sample Entropy

Guangtao Lu, Longyun Wu, Jiacheng Wang, Dan Yang, Tao Wang

IEEE Sensors Journal · 15.06.2023 · 23 (12) · 13292-13300

DOI: 10.1109/jsen.2023.3271607 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 15.06.2023. Verfasst von Guangtao Lu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Hubei Key Laboratory of Disaster Prevention and Mitigation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In bolted connection structures, some nonlinear effects take place when the ultrasonic wave travels through the contact area of the parts, and this contact nonlinear characteristics is influenced by the preload of bolts. In this study, an improved empirical mode decomposition (IEMD) algorithm is developed to extract the intrinsic mode functions (IMFs) related to the preload-dependent nonlinear characteristics, and then, these ones are reconstructed. Finally, the normalized sample entropy of the new signal is employed for bolt preload and loosening state detection. To validate this new method, an experimental setup with four specimens is designed and fabricated. The experimental results of three specimens show that the normalized entropy decreases monotonously from 1.35 to 1 as the tightening torque increases from 5 to 20 Nm. Moreover, Pearson’s coefficient ${r}$ of the fit lines is greater than 0.99, and the relative errors of the slope and intercept of the fit lines are no more than 3.0%. After this linear relationship is obtained, the tightening torque of the fourth specimen is estimated, and the relative error between the estimated and actual torque of specimen is 0.8%–7%, which demonstrates that this proposed method can detect the tightening torque accurately. In addition, compared to the traditional energy-based index, the saturation phenomenon is not observed in the entropy when the torque is near to the rated one, which indicates that the new approach can identify the early loosening state of bolts and its identification performance is much more efficient.

Förderung

  • National Natural Science Foundation of China
  • Hubei Key Laboratory of Disaster Prevention and Mitigation

Zitieren

APA

Lu, G., Wu, L., Wang, J., Yang, D., & Wang, T. (2023). Bolt-Loosening Identification by Using Empirical Mode Decomposition and Sample Entropy. IEEE Sensors Journal, 23(12), 13292-13300. https://doi.org/10.1109/jsen.2023.3271607

Vancouver

Lu G, Wu L, Wang J, Yang D, Wang T. Bolt-Loosening Identification by Using Empirical Mode Decomposition and Sample Entropy. IEEE Sensors Journal. 2023;23(12):13292-13300. doi:10.1109/jsen.2023.3271607

BibTeX
@article{Lu2023,
  author = {Lu, Guangtao and Wu, Longyun and Wang, Jiacheng and Yang, Dan and Wang, Tao},
  title = {Bolt-Loosening Identification by Using Empirical Mode Decomposition and Sample Entropy},
  journal = {IEEE Sensors Journal},
  year = {2023},
  volume = {23},
  number = {12},
  pages = {13292--13300},
  doi = {10.1109/jsen.2023.3271607}
}
Kostenlos starten →