Validation of Packaged Clad-Etched Fiber Bragg Grating as Underwater Acoustic Sensor
IEEE Sensors Journal · 01.02.2023 · 23 (3) · 2137-2144
DOI: 10.1109/jsen.2022.3227461 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Sensors Journal, erschienen am 01.02.2023. Verfasst von Suneetha Sebastian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Marine Systems Panel, Naval Research Board, India, Department of Science and Technology (DST)-Innovation in Science Pursuit for Inspired Research (INSPIRE) Faculty Scheme.
Abstract (Originalsprache)
The low intrinsic pressure sensitivity of fiber Bragg grating (FBG) sensors impede their potential applications in the field of hydro-acoustics. This article demonstrates a simple, yet effective way of improving the aggregate hydro-acoustic sensitivity of a bare FBG sensor through clad-etching of the fiber sensor followed by a side-hole polymer packaging. The proposed underwater acoustic sensor system is characterized and validated with a standard lead zirconate titanate (PZT)-based hydrophone under various experimental conditions. This is the first time, to the best of our knowledge, such a high acoustic pressure sensitivity enhancement of $\sim 50$ dB, in comparison with a bare FBG sensor, is reported using a conventional and highly operationally stable wavelength interrogation technique. The minimum detectable acoustic pressure is calculated to be $\sim 1$ Pa/ $(\text {Hz})^{1/2}$ with a maximum responsivity of $\sim 100$ nm/MPa in the investigated frequency range, with excellent performances in terms of linear response and repeatability. The dynamic range, in the present scenario, is only limited by the range of the interrogation system. The proposed underwater acoustic sensor along with the interrogation technique is a highly compact and cost-effective method for underwater acoustic sensing. Thus, the obtained results can be used for developing and producing long, narrow hydro-acoustic quasi-distributed sensor arrays for marine explorations and other applications.
Förderung
- Marine Systems Panel, Naval Research Board, India
- Department of Science and Technology (DST)-Innovation in Science Pursuit for Inspired Research (INSPIRE) Faculty Scheme
Zitieren
APA
Sebastian, S., Prasad, P. S., Michael, K., Avvaru, S., & Asokan, S. (2023). Validation of Packaged Clad-Etched Fiber Bragg Grating as Underwater Acoustic Sensor. IEEE Sensors Journal, 23(3), 2137-2144. https://doi.org/10.1109/jsen.2022.3227461
Vancouver
Sebastian S, Prasad PS, Michael K, Avvaru S, Asokan S. Validation of Packaged Clad-Etched Fiber Bragg Grating as Underwater Acoustic Sensor. IEEE Sensors Journal. 2023;23(3):2137-2144. doi:10.1109/jsen.2022.3227461
BibTeX
@article{Sebastian2023,
author = {Sebastian, Suneetha and Prasad, P. Shiva and Michael, Kiran and Avvaru, Sandhya and Asokan, Sundarrajan},
title = {Validation of Packaged Clad-Etched Fiber Bragg Grating as Underwater Acoustic Sensor},
journal = {IEEE Sensors Journal},
year = {2023},
volume = {23},
number = {3},
pages = {2137--2144},
doi = {10.1109/jsen.2022.3227461}
}
EUVIMED