Sub-6$\,\text{GHz}$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios
IEEE Journal of Microwaves · 2026-03 · 6 (2) · 360-375
DOI: 10.1109/jmw.2026.3661273 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Journal of Microwaves, 2026-03. Verfasst von Max Basler und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 6G-ICAS4Mobility, Federal Ministry of Research, Technology and Space.
Abstract (Originalsprache)
As highly assisted and autonomous driving systems evolve, the need for detailed environmental information becomes crucial for accurate trajectory planning and safety assurance. To achieve this, sub-6 $\,\text{GHz}$ vehicle-to-everything (V2X) communication signals could be leveraged for imaging purposes, merging communication and environmental sensing. However, the low center frequencies and limited bandwidths in this joint communication and sensing (JCAS) approach pose challenges for imaging performance. This article presents a method for using bandwidths across multiple communication bands, leveraging the synthetic aperture radar (SAR) principle to combine data of various measurement points and achieve high-resolution environmental images. To accomplish this, a channel sounding measurement is performed using a 1 $\,\text{GHz}$ to 4 $\,\text{GHz}$ linear frequency modulated (LFM) sensor system. The frequency ramp is then restricted to various subband constellations for each measurement point in the SAR processing. By randomly selecting subbands within the full ramp, the performance of random frequency hopping between measurement points is quantitatively assessed. The experimental SAR results validate the theoretical predictions and anticipated imaging characteristics. Images obtained with an effective bandwidth of 100 $\,\text{MHz}$ remain comparable to those acquired using the full bandwidth. To assess its real-world applicability in an automotive scenario, the evaluations are applied to various environments, with a particular focus on a parking lot. Despite frequency hopping being restricted to defined communication bands and an effective bandwidth of approximately 100 $\,\text{MHz}$ , the resulting SAR image clearly shows targets such as cars, a bicycle, a wooden fence, bushes, and a person. This demonstrates the feasibility of sub-6 $\,\text{GHz}$ SAR imaging under communication constraints within a JCAS context.
Förderung
- 6G-ICAS4Mobility
- Federal Ministry of Research, Technology and Space
Zitieren
APA
Basler, M., Grathwohl, A., Grebner, T., & Waldschmidt, C. (2026). Sub-6$\,\text{GHz}$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios. IEEE Journal of Microwaves, 6(2), 360-375. https://doi.org/10.1109/jmw.2026.3661273
Vancouver
Basler M, Grathwohl A, Grebner T, Waldschmidt C. Sub-6$\,\text{GHz}$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios. IEEE Journal of Microwaves. 2026;6(2):360-375. doi:10.1109/jmw.2026.3661273
BibTeX
@article{Basler2026,
author = {Basler, Max and Grathwohl, Alexander and Grebner, Timo and Waldschmidt, Christian},
title = {Sub-6$\,\textGHz$ SAR Imaging With Frequency Hopping Toward JCAS Applications in Automotive Scenarios},
journal = {IEEE Journal of Microwaves},
year = {2026},
volume = {6},
number = {2},
pages = {360--375},
doi = {10.1109/jmw.2026.3661273}
}
EUVIMED