EUVIMEDEUVIMED entdecken
Crossref

Analysis of Brittle Fracture Characteristics Under Static/Dynamic Loads in Silicon-Based MEMS Cantilevers

Mo Yang, Baolin Cheng, Weirong Nie, Mingyuyi Shi, Shenghong Lei, He Wang, Shijuan Dai, Yun Cao

Journal of Microelectromechanical Systems · 2026-06 · 35 (3) · 582-589

DOI: 10.1109/jmems.2026.3679568 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microelectromechanical Systems, 2026-06. Verfasst von Mo Yang und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: State Scholarship Fund of China Scholarship Council, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon-based MEMS cantilevers are widely used in high-reliability microsystems. Addressing the unclear relationship between the fracture strength of silicon-based MEMS cantilevers under static loads and high-strain-rate dynamic loads, this study investigates the typical cantilever-type setback safety device in fuze MEMS safety and arming devices. A dynamic model of a cantilever with a concentrated mass at the end was established. Through material characterization, static and dynamic loading experiments, and numerical simulations, the fracture response characteristics were systematically examined. The crystal orientation and mechanical parameters of (111)-oriented single-crystal silicon were verified through X-ray diffraction and nanoindentation testing. The critical fracture stress of cantilevers was obtained under quasi-static loading and half-sine acceleration impact loading. The results indicate that the fracture stress under dynamic load is significantly lower than that under static load. The load factor $K$ was introduced to effectively describe the relationship, with an average value of approximately 3.0620. Fracture section analysis further revealed the fundamental differences in crack propagation patterns under varying load conditions. The findings can serve as guidance for the engineering design of silicon-based cantilever.[2026-0027]

Förderung

  • State Scholarship Fund of China Scholarship Council
  • National Natural Science Foundation of China

Zitieren

APA

Yang, M., Cheng, B., Nie, W., Shi, M., Lei, S., Wang, H., Dai, S., & Cao, Y. (2026). Analysis of Brittle Fracture Characteristics Under Static/Dynamic Loads in Silicon-Based MEMS Cantilevers. Journal of Microelectromechanical Systems, 35(3), 582-589. https://doi.org/10.1109/jmems.2026.3679568

Vancouver

Yang M, Cheng B, Nie W, Shi M, Lei S, Wang H, et al. Analysis of Brittle Fracture Characteristics Under Static/Dynamic Loads in Silicon-Based MEMS Cantilevers. Journal of Microelectromechanical Systems. 2026;35(3):582-589. doi:10.1109/jmems.2026.3679568

BibTeX
@article{Yang2026,
  author = {Yang, Mo and Cheng, Baolin and Nie, Weirong and Shi, Mingyuyi and Lei, Shenghong and Wang, He and Dai, Shijuan and Cao, Yun},
  title = {Analysis of Brittle Fracture Characteristics Under Static/Dynamic Loads in Silicon-Based MEMS Cantilevers},
  journal = {Journal of Microelectromechanical Systems},
  year = {2026},
  volume = {35},
  number = {3},
  pages = {582--589},
  doi = {10.1109/jmems.2026.3679568}
}
Kostenlos starten →