EUVIMEDEUVIMED entdecken
Crossref

Uniform Whole Wafer Anisotropic Etching of Structural Ta Thin Films

Md Shariful Islam, Maarten P. de Boer

Journal of Microelectromechanical Systems · 2026-06 · 35 (3) · 429-439

DOI: 10.1109/jmems.2026.3672723 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microelectromechanical Systems, 2026-06. Verfasst von Md Shariful Islam und 1 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Gefördert von: Department of Energy through DOE Basic Energy Sciences, Bertucci Nanotechnology Laboratory, Carnegie Mellon University,, Carnegie Mellon University through the use of the materials characterization facility.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tantalum (Ta) has promise as a structural material for micromechanical sensors and actuators. Anisotropic etching of alpha ( $\alpha $ ) phase Ta is required for micromachining applications. Uniform thickness and etch across a full wafer are desirable features. An experimental investigation is conducted to study plasma etching rate and anisotropy in etching $\alpha $ -Ta in relation to pressure and gas flow ratio. A comparatively low toxicity gas, carbon tetrafluoride (CF 4 ), and argon (Ar) are used. Spectrometry by optical emission spectrometry (OES) and residual gas analysis (RGA) are employed to characterize the plasma to gain insight into the etch mechanisms. At low flow, the etch rate is slow due to an inadequate supply of the etching gas, CF 4 . The etch rate is also slowed at high flow due to a reduced CF 4 residence time. Flow and pressure conditions to achieve a good etch rate and vertical sidewalls are identified and explained by means of a full factorial experiment coupled with emission spectra. With these conditions, uniform etching of $2.5~\mu $ m thick $\alpha $ -Ta across a 4-inch wafer is demonstrated.[2025-0220]

Förderung

  • Department of Energy through DOE Basic Energy Sciences
  • Bertucci Nanotechnology Laboratory, Carnegie Mellon University,
  • Carnegie Mellon University through the use of the materials characterization facility

Zitieren

APA

Islam, M. S., & Boer, M. P. D. (2026). Uniform Whole Wafer Anisotropic Etching of Structural Ta Thin Films. Journal of Microelectromechanical Systems, 35(3), 429-439. https://doi.org/10.1109/jmems.2026.3672723

Vancouver

Islam MS, Boer MPD. Uniform Whole Wafer Anisotropic Etching of Structural Ta Thin Films. Journal of Microelectromechanical Systems. 2026;35(3):429-439. doi:10.1109/jmems.2026.3672723

BibTeX
@article{Islam2026,
  author = {Islam, Md Shariful and Boer, Maarten P. de},
  title = {Uniform Whole Wafer Anisotropic Etching of Structural Ta Thin Films},
  journal = {Journal of Microelectromechanical Systems},
  year = {2026},
  volume = {35},
  number = {3},
  pages = {429--439},
  doi = {10.1109/jmems.2026.3672723}
}
Kostenlos starten →