Dual-Wavelength Parity-Time Symmetric Brillouin Fiber Laser With Asymmetric Rings
Journal of Lightwave Technology · 15.12.2025 · 43 (24) · 11058-11066
DOI: 10.1109/jlt.2025.3618101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.12.2025. Verfasst von Qing Yan und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Central Guidance on Local Science and Technology Development Fund of Shanxi Province, Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
A dual-wavelength parity-time (PT) symmetric Brillouin fiber laser (BFL) with asymmetric rings is proposed and experimentally verified. Two single-mode fibers (SMFs) of 10 km and 1 km length, differing by 74 MHz in Brillouin frequency shift, are used to generate two highly coherent laser wavelengths of λ1 and λ2, respectively. Both of them achieve Vernier effect and PT symmetry in an unbalanced Mach-Zehnder structure ring cavity, which mainly composed of a 10 km long ring (LR), 1 km short ring (SR) and a polarization beam splitter (PBS). Specifically, PBS divides λ1 and λ2 both into two orthogonal polarized beams, enabling each to achieve their own PT symmetry in the asymmetric rings. λ1 experience gain in LR whereas loss in SR, with the reverse occurring for λ1. Tuning the polarization state to balance each wavelength’s gain and loss above the coupling threshold, PT symmetry is broken, thereby enabling single longitudinal mode (SLM) simultaneous operation of dual-wavelength. In contrast to existing PT symmetric BFL, this design employs asymmetric rings to prove the same ring can realize the existence of completely opposite and independently gain/loss states for different wavelength, ultimately producing two ultra-narrow linewidth SLM outputs. In the experiment, the dual-wavelength BFL demonstrated narrow linewidths of 4.1 Hz and 83 Hz, with a maximum side mode suppression ratio of 58.1 dB and an optical signal to noise ratio enhanced to 74 dB. Over a 20-minute period, the frequency and power fluctuations of λ1 and λ2 remain below ±135.8 kHz and ±0.87 dB. Furthermore, the beat microwave signal derived from the dual-wavelength output exhibits exceptional frequency stability, enabled by minimal differential phase noise between the two emissions.
Förderung
- Central Guidance on Local Science and Technology Development Fund of Shanxi Province
- Basic and Applied Basic Research Foundation of Guangdong Province
- National Natural Science Foundation of China
Zitieren
APA
Yan, Q., Yu, L., Yang, X., Wang, H., Li, M., Wu, Z., He, W., You, Y., Liu, Y., & Chou, X. (2025). Dual-Wavelength Parity-Time Symmetric Brillouin Fiber Laser With Asymmetric Rings. Journal of Lightwave Technology, 43(24), 11058-11066. https://doi.org/10.1109/jlt.2025.3618101
Vancouver
Yan Q, Yu L, Yang X, Wang H, Li M, Wu Z, et al. Dual-Wavelength Parity-Time Symmetric Brillouin Fiber Laser With Asymmetric Rings. Journal of Lightwave Technology. 2025;43(24):11058-11066. doi:10.1109/jlt.2025.3618101
BibTeX
@article{Yan2025,
author = {Yan, Qing and Yu, Lei and Yang, Xulei and Wang, Huijie and Li, Mingxing and Wu, Zepeng and He, Wenjun and You, Yajun and Liu, Yi and Chou, Xiujian},
title = {Dual-Wavelength Parity-Time Symmetric Brillouin Fiber Laser With Asymmetric Rings},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {24},
pages = {11058--11066},
doi = {10.1109/jlt.2025.3618101}
}
EUVIMED