Tantalum and Tantalum–Palladium Coated FBGs for Low-Concentration Hydrogen Sensing
Journal of Lightwave Technology · 01.04.2026 · 44 (7) · 2776-2782
DOI: 10.1109/jlt.2025.3616783 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.04.2026. Verfasst von Kasun Prabuddha Dissanayake und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Clean Aviation, HYDEA project, Horizon Europe OVERLEAF project.
Abstract (Originalsprache)
Hydrogen is a cornerstone of the emerging net-zero carbon economy, and its widespread deployment demands sensitive, stable, and scalable detection technologies. In this study, we present a comparative performance analysis of Fibre Bragg Grating (FBG) sensors coated with nanometre-thick metal hydride-forming layers—tantalum (Ta), tantalum-palladium alloy (Ta $_{0.88}$ Pd $_{0.12}$ ), palladium (Pd), and palladium-gold alloy (Pd $_{0.6}$ Au $_{0.4}$ )—for optical hydrogen sensing. The integration of Ta and Ta $_{0.88}$ Pd $_{0.12}$ , two tantalum-based metal hydrides, with FBG sensors is introduced here for the first time, offering a promising alternative to conventional Pd-based materials. All coatings were deposited via magnetron sputtering and tested under controlled hydrogen exposure across concentrations ranging from 0.001% to 100% H $_{2}$ . The Ta-based FBGs exhibited outstanding performance, showing a remarkably linear relative wavelength shift over the full tested range (0.001% to 100% H $_{2}$ ), with sensitivity detectable down to 10 ppm—the lowest concentration achievable in the current setup. Both Ta and Ta $_{0.88}$ Pd $_{0.12}$ sensors exhibited fully reversible and hysteresis-free response characteristics, with rapid response and recovery. Among them, the Ta $_{0.88}$ Pd $_{0.12}$ sensor with a 100 nm coating demonstrated the highest logarithmic sensitivity of $\sim$ 9 pm/decade(%H $_{2}$ ), corresponding to a 9 pm wavelength shift for every tenfold increase in hydrogen concentration between 0.001% and 100% H 2 . In contrast, Pd and Pd $_{0.6}$ Au $_{0.4}$ sensors showed degraded performance at low concentrations and greater signal hysteresis. These results underscore the potential of Ta and Ta $_{0.88}$ Pd $_{0.12}$ coatings as robust and high-performance alternatives to conventional Pd-based materials for next-generation distributed fibre-optic hydrogen sensing systems.
Förderung
- Clean Aviation
- HYDEA project
- Horizon Europe OVERLEAF project
Zitieren
APA
Dissanayake, K. P., Yuan, Z., Dewi, H. S., Travers, T., Schreuders, H., Bannenberg, L. J., & Groves, R. M. (2026). Tantalum and Tantalum–Palladium Coated FBGs for Low-Concentration Hydrogen Sensing. Journal of Lightwave Technology, 44(7), 2776-2782. https://doi.org/10.1109/jlt.2025.3616783
Vancouver
Dissanayake KP, Yuan Z, Dewi HS, Travers T, Schreuders H, Bannenberg LJ, et al. Tantalum and Tantalum–Palladium Coated FBGs for Low-Concentration Hydrogen Sensing. Journal of Lightwave Technology. 2026;44(7):2776-2782. doi:10.1109/jlt.2025.3616783
BibTeX
@article{Dissanayake2026,
author = {Dissanayake, Kasun Prabuddha and Yuan, Ziqing and Dewi, H. Sandra and Travers, Théo and Schreuders, Herman and Bannenberg, Lars J. and Groves, Roger M.},
title = {Tantalum and Tantalum–Palladium Coated FBGs for Low-Concentration Hydrogen Sensing},
journal = {Journal of Lightwave Technology},
year = {2026},
volume = {44},
number = {7},
pages = {2776--2782},
doi = {10.1109/jlt.2025.3616783}
}
EUVIMED