Inverse-Designed 90-Degree Silicon Nitride Bends for the C Band
Journal of Lightwave Technology · 15.06.2025 · 43 (12) · 5804-5810
DOI: 10.1109/jlt.2025.3554096 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.06.2025. Verfasst von Julian L. Pita Ruiz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: PRIMA Quebec, Natural Sciences and Engineering Research Council of Canada, CMC Microsystems.
Abstract (Originalsprache)
We demonstrate the use of inverse design to achieve high-efficiency, compact $90^{\circ }$ bends with radii as small as $6 \,{\mu }\mathrm{m}$ with silicon nitride waveguides. These bends are designed for the TE polarization of single-mode waveguides with a cross-section of $850 \,{\mathrm{nm}}$ × $400 \,{\mathrm{nm}}$ , optimized for the C-band. Both simulations and experimental results confirm that the freeform bends obtained through inverse design outperform conventional circular and Euler bends across four footprint sizes ranging from $6$ × $6 \,{\mu }\mathrm{m}^{2}$ to $21$ × $21 \,{{\mu }\mathrm{m}}^{2}$ . All inverse-designed bends were fabricated using an e-beam lithography process and designed with a minimum feature size of 160 nm, ensuring maximum compatibility with commercial optical lithography processes and viability for large-scale production. Simulations for the $6 \,{\mu }\mathrm{m}$ radius bends show that the best freeform bend exhibits an average loss of $1.62 \,{\mathrm{dB}}$ across the entire C-band, compared to $2.88 \,{\mathrm{dB}}$ for circular bends and $3.46 \,{\mathrm{dB}}$ for Euler bends. Experimental results align well with simulations, with measured losses of $1.89 \,{\mathrm{dB}}$ , $2.86 \,{\mathrm{dB}}$ , and $3.44 \,{\mathrm{dB}}$ for the freeform, circular, and Euler bends, respectively. For the $11 \,{\mu }\mathrm{m}$ bending radius, one of the freeform structures demonstrated low losses of $0.18 \,{\mathrm{dB}}$ , representing reductions by factors of up to $6.6$ and $1.8$ times compared to Euler and circular bends, respectively. For the $16 \,{\mu }\mathrm{m}$ and $21 \,{\mu }\mathrm{m}$ radii, the best freeform bends achieved average losses of $0.08 \,{\mathrm{dB}}$ and $0.11 \,{\mathrm{dB}}$ per $90^{\circ }$ bend across the $1530 \,{\mathrm{nm}}$ to $1565 \,{\mathrm{nm}}$ wavelength range. These results highlight the potential of inverse design to enable significantly more compact routing in silicon nitride photonic chips, facilitating the development of high-density photonic circuits.
Förderung
- PRIMA Quebec
- Natural Sciences and Engineering Research Council of Canada
- CMC Microsystems
- Applied Nanotools
Zitieren
APA
Ruiz, J. L. P., Dalvand, N., & Ménard, M. (2025). Inverse-Designed 90-Degree Silicon Nitride Bends for the C Band. Journal of Lightwave Technology, 43(12), 5804-5810. https://doi.org/10.1109/jlt.2025.3554096
Vancouver
Ruiz JLP, Dalvand N, Ménard M. Inverse-Designed 90-Degree Silicon Nitride Bends for the C Band. Journal of Lightwave Technology. 2025;43(12):5804-5810. doi:10.1109/jlt.2025.3554096
BibTeX
@article{Ruiz2025,
author = {Ruiz, Julian L. Pita and Dalvand, Narges and Ménard, Michaël},
title = {Inverse-Designed 90-Degree Silicon Nitride Bends for the C Band},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {12},
pages = {5804--5810},
doi = {10.1109/jlt.2025.3554096}
}
EUVIMED