Single-Mode Helical Sapphire Bragg Grating for High-Temperature Sensing
Journal of Lightwave Technology · 15.03.2025 · 43 (6) · 2982-2987
DOI: 10.1109/jlt.2024.3503579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.03.2025. Verfasst von Xizhen Xu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Guangdong Provincial Department of Science and Technology.
Abstract (Originalsprache)
Sapphire fiber Bragg grating (SFBG) is a potential high-temperature sensor, which can withstand 1900 °C. However, the broadband reflection spectrum of SFBG results from the multimode operation, hampering the sensing performance significantly. In this paper, we have reported on a single-mode SFBG based on the helical structure created by using a femtosecond laser direct writing technique. We found that the ring-shaped inscription pattern inscribed in sapphire fiber is irregular due to the focal-point distortion induced by the cylindrical geometry of the sapphire fiber. A slit beam shaping method was employed to solve this problem. By using the optimized slit width of 0.35 mm, the regular ring patterns can be inscribed within the sapphire fiber successfully. Such a structure has the maximum negative refractive index change of −8.8 × 10−3 and a width of 7.7 μm, which can serve as depressed cladding waveguide. Moreover, helical structures with various diameters have been created in sapphire fibers. The near-field profiles of the transmission mode and the spectra have been measured. The experimental results show that a single-mode helical SFBG with a diameter of 14 μm and a period of 1.78 μm can be achieved, exhibiting a narrow bandwidth of 0.18 nm and a high reflectivity of 66.3%. In addition, the temperature sensing performance of a single-mode SFBG was studied. Such a device shows increasing temperature sensitivity at elevated temperatures, i.e., 22.5 pm/°C at 20 °C, 27.5 pm/°C at 600 °C and 33.9 pm/°C at 1200 °C, which is similar to the conventional multimode SFBG. However, its temperature response has much better repeatability than that of the multimode SFBG, benefiting from the single-mode transmission with high stability. Hence, the proposed single-mode SFBG is a promising high-temperature sensor, that can be applied in many fields, for example, power plants, gas turbines, and hypersonic vehicles.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Guangdong Provincial Department of Science and Technology
- Shenzhen Key Laboratory of Ultra-fast Laser Micro/Nano Manufacturing
Zitieren
APA
Xu, X., He, J., Wu, J., Chen, R., Zhou, F., Wang, B., Zhang, Y., Wang, Y., & He, J. (2025). Single-Mode Helical Sapphire Bragg Grating for High-Temperature Sensing. Journal of Lightwave Technology, 43(6), 2982-2987. https://doi.org/10.1109/jlt.2024.3503579
Vancouver
Xu X, He J, Wu J, Chen R, Zhou F, Wang B, et al. Single-Mode Helical Sapphire Bragg Grating for High-Temperature Sensing. Journal of Lightwave Technology. 2025;43(6):2982-2987. doi:10.1109/jlt.2024.3503579
BibTeX
@article{Xu2025,
author = {Xu, Xizhen and He, Jia and Wu, Jiafeng and Chen, Runxiao and Zhou, Fan and Wang, Benzhang and Zhang, Yupeng and Wang, Yiping and He, Jun},
title = {Single-Mode Helical Sapphire Bragg Grating for High-Temperature Sensing},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {6},
pages = {2982--2987},
doi = {10.1109/jlt.2024.3503579}
}
EUVIMED