3D-Printed Terahertz Subwavelength Dual-Core Fibers With Dense Channel-Integration
Journal of Lightwave Technology · 01.03.2025 · 43 (5) · 2329-2339
DOI: 10.1109/jlt.2024.3487649 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.03.2025. Verfasst von Haiyuan Ge und 8 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Terahertz (THz) fiber that provides high-speed connections is one of the most essential components in THz communication systems. The emerging space-division-multiplexing technology is expected to increase the transmission capacity of THz communications. A promising candidate to achieve that is integrating multiple channels in a compact THz multi-core fiber system. Here, we propose and experimentally demonstrate a THz subwavelength rectangular dielectric dual-core fiber structure, where two identical cores can be densely integrated, thanks to the polarization-maintaining feature of the rectangular fiber. Different configurations of the fiber structure, including the placements, core-spacings, and polarization states of two fiber cores, are comprehensively investigated to improve the channel isolation. Numerical simulations show that the fractional power in core of fiber mode has a dominant effect on inter-core coupling performance. Moreover, we design the core size (1 mm × 0.5 mm) slightly less than the WR5.1 waveguide (1.295 mm × 0.6475 mm) so that the fiber can be conveniently connected with the WR5.1 flange port with mode excitation efficiencies up to 62.8%. A cost-efficient dielectric 3D printing technique is employed for rapid fabrications of dual-core fibers as well as corresponding polymer flange structures that offer solid integration between the fiber samples and the WR5.1 port. Experimental measurements of dual-core fibers demonstrate that a 4-mm core-spacing (less than three times of the operation wavelengths over a frequency range of 0.17–0.21 THz) is sufficient to support robust dual-channel propagation with channel isolation values more than 15 dB, which are consistent with the theoretical and numerical results. This work provides a densely integrated dual-core fiber system with low fabrication cost and practical connection to WR5.1 flange, holding exciting potentials for high-capacity THz space-division-multiplexing communication systems.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Ge, H., Li, H., Jie, L., Wang, J., Cao, Y., Atakaramians, S., Gong, Y., Ren, G., & Pei, L. (2025). 3D-Printed Terahertz Subwavelength Dual-Core Fibers With Dense Channel-Integration. Journal of Lightwave Technology, 43(5), 2329-2339. https://doi.org/10.1109/jlt.2024.3487649
Vancouver
Ge H, Li H, Jie L, Wang J, Cao Y, Atakaramians S, et al. 3D-Printed Terahertz Subwavelength Dual-Core Fibers With Dense Channel-Integration. Journal of Lightwave Technology. 2025;43(5):2329-2339. doi:10.1109/jlt.2024.3487649
BibTeX
@article{Ge2025,
author = {Ge, Haiyuan and Li, Haisu and Jie, Lu and Wang, Jianshuai and Cao, Yang and Atakaramians, Shaghik and Gong, Yandong and Ren, Guobin and Pei, Li},
title = {3D-Printed Terahertz Subwavelength Dual-Core Fibers With Dense Channel-Integration},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {5},
pages = {2329--2339},
doi = {10.1109/jlt.2024.3487649}
}
EUVIMED