Single-Frequency Pulsed Fiber Laser Enabled by Tantalum Carbide Featuring 2.8 μm Wavelength Tunability
Journal of Lightwave Technology · 01.03.2025 · 43 (5) · 2277-2283
DOI: 10.1109/jlt.2024.3487197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.03.2025. Verfasst von Zongxiao Fan und 10 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jilin Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
We demonstrate, for the first time, to the best of our knowledge, a single-frequency pulsed fiber laser (SFPFL) operating in the important mid-infrared region. We employed a high precision germanium etalon along with a compound cavity to achieve a single-longitudinal-mode selection and home-synthesized MXene-Ta4C3Tx to initiate Q-switching in an Er3+-doped ZBLAN fiber laser. The MXene-Ta4C3Tx, synthesized through selective etching, exhibits a modulation depth of 14.8% and a saturation optical intensity of 3.62 GW/cm2 at 2794.4 nm. The developed SFPFL is centered at 2780.06 nm with a linewidth as narrow as 320 kHz, and has an output power, repetition rate, pulse width, and pulse energy of 121.8 mW, 132.4 kHz, 1.48 μs, and 0.92 μJ, respectively. The high stability of the laser pulses is confirmed by the high radio-frequency signal-to-noise ratio of 50 dB. With the incorporation of a diffraction grating, wavelength tuning from 2753.14 to 2780.26 nm was achieved. Our findings introduce a wavelength-tunable SFPFL source characterized by high coherence, high stability, and low noise. This source effectively addresses the challenges associated with self-modulation-induced temporal instability, elevated noise levels, and reduced coherence typically encountered in conventional multi-longitude-mode Q-switching operations. In addition, our results reveal MXene-Ta4C3Tx as a promising all-optical passive modulator for laser pulse generation in the essential mid-infrared spectral region.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jilin Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Fan, Z., Chen, H., Liu, W., Wu, Z., Shang, C., Wang, S., Kang, Z., Yue, H., Wang, D., Wei, C., & Liu, Y. (2025). Single-Frequency Pulsed Fiber Laser Enabled by Tantalum Carbide Featuring 2.8 μm Wavelength Tunability. Journal of Lightwave Technology, 43(5), 2277-2283. https://doi.org/10.1109/jlt.2024.3487197
Vancouver
Fan Z, Chen H, Liu W, Wu Z, Shang C, Wang S, et al. Single-Frequency Pulsed Fiber Laser Enabled by Tantalum Carbide Featuring 2.8 μm Wavelength Tunability. Journal of Lightwave Technology. 2025;43(5):2277-2283. doi:10.1109/jlt.2024.3487197
BibTeX
@article{Fan2025,
author = {Fan, Zongxiao and Chen, Honghao and Liu, Wenshu and Wu, Zhehao and Shang, Chencheng and Wang, Shengyi and Kang, Zhe and Yue, Huimin and Wang, Dongsheng and Wei, Chen and Liu, Yong},
title = {Single-Frequency Pulsed Fiber Laser Enabled by Tantalum Carbide Featuring 2.8 μm Wavelength Tunability},
journal = {Journal of Lightwave Technology},
year = {2025},
volume = {43},
number = {5},
pages = {2277--2283},
doi = {10.1109/jlt.2024.3487197}
}
EUVIMED