Low-Loss Silicon Directional Coupler With Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides
Journal of Lightwave Technology · 01.09.2024 · 42 (17) · 6011-6018
DOI: 10.1109/jlt.2024.3407339 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.09.2024. Verfasst von Ahmed H. El-Saeed und 19 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: imec's industry-affiliation R&D program.
Abstract (Originalsprache)
We demonstrate a design for a high-performance $2 \times 2$ splitter meeting the essential requirements of broadband coupling, support for arbitrary coupling ratio, ultra low-loss, high fabrication tolerance, and a compact footprint. This is achieved based on a rigorous coupled mode theory analysis of the broadband response of the bent directional coupler (DC) and by demonstrating a full coupling model, with measured broadband values of 0.4, 0.5, 0.6, and 0.7. As a benchmark, we demonstrate a 0.5:0.5 splitter that significantly reduces coupling variation from 0.391 in the traditional DC to just 0.051 over an 80 nm wavelength span. This represents a remarkable 7.67 times reduction in coupling variation. Further, newly-invented low-loss bends were used in the proposed design leading to an ultra low-loss design with negligible excess loss ( $\mathrm{0.003 \pm 0.013 \ dB}$ ). The proposed 0.5:0.5 silicon strip waveguide-based design is tolerant and shows consistently low coupling variation over a full 300 mm wafer showcasing a maximum cross coupling variation of 0.112 over 80 nm wavelength range, at the extreme edge of the wafer. Futhermore, we augmented the wafer mapping with a waveguide width fabrication tolerance study, confirming the tolerance of the device with a mere 0.061 maximum coupling variation with a waveguide width deviation of $\pm 20$ nm over 80 nm wavelength range. These specs make the proposed splitter an attractive component for practical applications with mass production.
Förderung
- imec's industry-affiliation R&D program
Zitieren
APA
El-Saeed, A. H., Elshazly, A., Kobbi, H., Magdziak, R., Lepage, G., Marchese, C., Vaskasi, J. R., Bipul, S., Bode, D., Filipcic, M. E., Velenis, D., Chakrabarti, M., Heyn, P. D., Verheyen, P., Absil, P., Ferraro, F., Ban, Y., Campenhout, J. V., Bogaerts, W., & Deng, Q. (2024). Low-Loss Silicon Directional Coupler With Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides. Journal of Lightwave Technology, 42(17), 6011-6018. https://doi.org/10.1109/jlt.2024.3407339
Vancouver
El-Saeed AH, Elshazly A, Kobbi H, Magdziak R, Lepage G, Marchese C, et al. Low-Loss Silicon Directional Coupler With Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides. Journal of Lightwave Technology. 2024;42(17):6011-6018. doi:10.1109/jlt.2024.3407339
BibTeX
@article{ElSaeed2024,
author = {El-Saeed, Ahmed H. and Elshazly, Alaa and Kobbi, Hakim and Magdziak, Rafal and Lepage, Guy and Marchese, Chiara and Vaskasi, Javad Rahimi and Bipul, Swetanshu and Bode, Dieter and Filipcic, Marko Ersek and Velenis, Dimitrios and Chakrabarti, Maumita and Heyn, Peter De and Verheyen, Peter and Absil, Philippe and Ferraro, Filippo and Ban, Yoojin and Campenhout, Joris Van and Bogaerts, Wim and Deng, Qingzhong},
title = {Low-Loss Silicon Directional Coupler With Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides},
journal = {Journal of Lightwave Technology},
year = {2024},
volume = {42},
number = {17},
pages = {6011--6018},
doi = {10.1109/jlt.2024.3407339}
}
EUVIMED