EUVIMEDEUVIMED entdecken
Crossref

Towards High-Power and -Efficiency ∼2.8 μm Lasing: Lightly-Erbium-Doped ZrF 4 Fiber Laser Pumped at ∼1.7 μm

Hongyu Luo, Junchuan Shi, Junsheng Chen, Yongzhi Wang, Jianfeng Li, Han Wu, Yong Liu

Journal of Lightwave Technology · 01.01.2024 · 42 (1) · 316-325

DOI: 10.1109/jlt.2023.3305608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 01.01.2024. Verfasst von Hongyu Luo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Sichuan Provincial Science and Technology Support Program, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this article, we demonstrate great potential of lightly-erbium(Er 3+ )-doped ZrF 4 fiber in efficient power scaling at ∼2.8 μm, when excited at ∼1.7 μm. Core-pumped by a random Raman fiber laser at 1.69 μm, the 1.5 mol.% Er 3+ -doped ZrF 4 fiber in a F-P cavity has experimentally yielded an output power of >6 W at 2.783 μm with a slope efficiency of up to 58.4% (with respect to the absorbed pump), close to its Stokes limit of 60.7% (1.69/2.783). To our knowledge, this is the highest efficiency of Er 3+ -doped ZrF 4 fiber lasers in the mid-infrared. Further power scaling is only limited by the current pump power. Based on the validated numerical model, the dominant role of the excited state absorption (ESA) process (i.e., $^4{\mathrm{I}}_{13/2}{ \to }^4{\mathrm{I}}_{9/2}$ ) in exciting efficient ∼2.8 μm laser has been highlighted, and the resonant ground state absorption process (i.e., $^4{\mathrm{I}}_{15/2}{ \to }^4{\mathrm{I}}_{13/2}$ ) is also essential. The simulation results indicate that the pump wavelength closer to the ESA peak can yield a higher slope efficiency. In addition, heat load analyses via numerical modeling reveals that the $^4{\mathrm{I}}_{9/2}{ \to }^4{\mathrm{I}}_{11/2}$ multiphonon relaxation is the main heat source of the system. By taking fiber optical damage limit into account simultaneously, a high-power lightly-Er 3+ -doped ZrF 4 fiber laser arrangement has been proposed, which theoretically enables 100-W-class output under a slope efficiency of >50% and a relatively low heat load.

Förderung

  • National Natural Science Foundation of China
  • Sichuan Provincial Science and Technology Support Program
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Luo, H., Shi, J., Chen, J., Wang, Y., Li, J., Wu, H., & Liu, Y. (2024). Towards High-Power and -Efficiency ∼2.8 μm Lasing: Lightly-Erbium-Doped ZrF 4 Fiber Laser Pumped at ∼1.7 μm. Journal of Lightwave Technology, 42(1), 316-325. https://doi.org/10.1109/jlt.2023.3305608

Vancouver

Luo H, Shi J, Chen J, Wang Y, Li J, Wu H, et al. Towards High-Power and -Efficiency ∼2.8 μm Lasing: Lightly-Erbium-Doped ZrF 4 Fiber Laser Pumped at ∼1.7 μm. Journal of Lightwave Technology. 2024;42(1):316-325. doi:10.1109/jlt.2023.3305608

BibTeX
@article{Luo2024,
  author = {Luo, Hongyu and Shi, Junchuan and Chen, Junsheng and Wang, Yongzhi and Li, Jianfeng and Wu, Han and Liu, Yong},
  title = {Towards High-Power and -Efficiency ∼2.8 μm Lasing: Lightly-Erbium-Doped ZrF 4 Fiber Laser Pumped at ∼1.7 μm},
  journal = {Journal of Lightwave Technology},
  year = {2024},
  volume = {42},
  number = {1},
  pages = {316--325},
  doi = {10.1109/jlt.2023.3305608}
}
Kostenlos starten →