EUVIMEDEUVIMED entdecken
Crossref

Inverse Design of Free-Form Devices With Fabrication-Friendly Topologies Based on Structure Transformation

Yuchen Chen, Jifang Qiu, Zhenli Dong, Lihang Wang, Yin Liu, Hongxiang Guo, Jian Wu

Journal of Lightwave Technology · 15.07.2023 · 41 (14) · 4762-4776

DOI: 10.1109/jlt.2023.3242472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Lightwave Technology, erschienen am 15.07.2023. Verfasst von Yuchen Chen und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the fabrication robustness of the inverse-designed devices that have complex topology structures, we propose an optimization technique, named as structure transformation (ST), to transform structures of the inverse-designed devices into simple topologies that contain less irregularly tiny features, sharp corners and less boundary regions. The proposed ST technique, based on a new alternately-implementing strategy of optical performance optimization and modified curvature-constrained structure adjustment, effectively facilitates an overall simplification of the structure topologies of devices, enhances their robustness to fabrication uncertainties, and simultaneously maintains or even improves their optical performances. To verify the feasibility of the technique, three types of typical SOI-based devices (T-junction, 1×3 power splitter and 90° crossing) with and without ST were designed, among which the ones without ST were given as control groups. Thanks to the ST, the boundary regions and highly curved ranges in these devices are all significantly reduced, while their performances are well maintained or even improved. Next, the effect of the ST on fabrication tolerances were investigated, and the simulation results show that the devices with ST are more robust to over/under-etching errors than the control groups. At last, the T junction and 1×3 power splitter and their control groups were fabricated each with 6 samples. Measured results show that the performances of the devices with ST deviate from the simulated performances much less than their control groups, which agrees well with the simulated results in fabrication tolerances investigation. Summarily, we proposed and demonstrated a technique that provides the inverse-designed devices new possibilities to achieve simpler topologies with better fabrication robustness and improved performances at the same time.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, Y., Qiu, J., Dong, Z., Wang, L., Liu, Y., Guo, H., & Wu, J. (2023). Inverse Design of Free-Form Devices With Fabrication-Friendly Topologies Based on Structure Transformation. Journal of Lightwave Technology, 41(14), 4762-4776. https://doi.org/10.1109/jlt.2023.3242472

Vancouver

Chen Y, Qiu J, Dong Z, Wang L, Liu Y, Guo H, et al. Inverse Design of Free-Form Devices With Fabrication-Friendly Topologies Based on Structure Transformation. Journal of Lightwave Technology. 2023;41(14):4762-4776. doi:10.1109/jlt.2023.3242472

BibTeX
@article{Chen2023,
  author = {Chen, Yuchen and Qiu, Jifang and Dong, Zhenli and Wang, Lihang and Liu, Yin and Guo, Hongxiang and Wu, Jian},
  title = {Inverse Design of Free-Form Devices With Fabrication-Friendly Topologies Based on Structure Transformation},
  journal = {Journal of Lightwave Technology},
  year = {2023},
  volume = {41},
  number = {14},
  pages = {4762--4776},
  doi = {10.1109/jlt.2023.3242472}
}
Kostenlos starten →