EUVIMEDEUVIMED entdecken
Crossref

CALM: Confidence-Aware Beam Training With Reliability-Weighted Decoding and Adaptive Pilot Allocation for RIS-Assisted Initial Access

Zaid Al-Bataineh, Jamil K. J. Bataineh, Mohammad Al Bataineh, Nasir Saeed, Ahmed Musa Alshorman

IEEE Internet of Things Journal · 2026-11 · 13 (22) · 53136-53152

DOI: 10.1109/jiot.2026.3728063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Internet of Things Journal, 2026-11. Verfasst von Zaid Al-Bataineh und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reconfigurable intelligent surfaces (RISs) can improve coverage and energy efficiency, but their practical value depends on reliable initial access before alignment is established. In that phase, the training signal-to-noise ratio (SNR) at the user can be low, making hierarchical and hard-decision coded beam-training vulnerable to error propagation. This article develops confidence-aware layered matching (CALM), a receiver-centric beam-training framework that extracts soft reliability information from the four beam-tuple measurements collected at each training layer. CALM-JD (joint decoding) performs reliability-weighted decoding of the base station (BS) and RIS hypotheses from the shared layer measurements instead of committing to brittle layer-wise hard decisions. CALM-APA (adaptive pilot allocation) further reallocates extra pilots only to the least reliable layers, while CALM-APA+KCONF (top- $K$ confirmation) adds a bounded top- $K$ tuple-confirmation stage to improve robustness without losing runtime predictability. The resulting methods preserve the low-overhead layered structure of coded beam training while addressing low-SNR reliability and bounded online latency. Complexity analysis and relative software runtime profiling are reported alongside achievable-rate and misalignment results. For a 28-GHz BS–RIS–user link with a 64-antenna BS and a $16\times 16$ RIS, the dominant-path baseline shows that the proposed CALM variants significantly reduce misalignment probability in the low-SNR regime and, in the simplified narrowband dominant-path setting studied here, approach the exhaustive-search rate ceiling with roughly two orders-of-magnitude fewer pilots than exhaustive search. Additional narrowband robustness tests with richer sparse multipath (up to eight physical paths per hop), RIS phase quantization, and angular off-grid mismatch preserve the same qualitative ordering, with CALM-APA+KCONF retaining the strongest rate under the tested nonidealities. These results support confidence-aware coded beam training as a physical-layer access mechanism whose pilot savings can be mapped to concrete benefits for Internet of Things/cyber–physical systems (IoT/CPS)—including reduced per-device access latency and increased device density under fixed frame budgets—while broader wideband, hardware, and system-level validation remain future work.

Zitieren

APA

Al-Bataineh, Z., Bataineh, J. K. J., Bataineh, M. A., Saeed, N., & Alshorman, A. M. (2026). CALM: Confidence-Aware Beam Training With Reliability-Weighted Decoding and Adaptive Pilot Allocation for RIS-Assisted Initial Access. IEEE Internet of Things Journal, 13(22), 53136-53152. https://doi.org/10.1109/jiot.2026.3728063

Vancouver

Al-Bataineh Z, Bataineh JKJ, Bataineh MA, Saeed N, Alshorman AM. CALM: Confidence-Aware Beam Training With Reliability-Weighted Decoding and Adaptive Pilot Allocation for RIS-Assisted Initial Access. IEEE Internet of Things Journal. 2026;13(22):53136-53152. doi:10.1109/jiot.2026.3728063

BibTeX
@article{AlBataineh2026,
  author = {Al-Bataineh, Zaid and Bataineh, Jamil K. J. and Bataineh, Mohammad Al and Saeed, Nasir and Alshorman, Ahmed Musa},
  title = {CALM: Confidence-Aware Beam Training With Reliability-Weighted Decoding and Adaptive Pilot Allocation for RIS-Assisted Initial Access},
  journal = {IEEE Internet of Things Journal},
  year = {2026},
  volume = {13},
  number = {22},
  pages = {53136--53152},
  doi = {10.1109/jiot.2026.3728063}
}
Kostenlos starten →