EUVIMEDEUVIMED entdecken
Crossref

Compact ASIC Design of a Secure Hexadecimal Digital Lock for Consumer Electronics

Bhaskar Lal Das, Weiwei Jiang, Alak Majumder

IEEE Internet of Things Journal · 2026-08 · 13 (15) · 34056-34066

DOI: 10.1109/jiot.2026.3697699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Internet of Things Journal, 2026-08. Verfasst von Bhaskar Lal Das und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Integrated Circuit and System (i-CAS) Laboratory, NIT Arunachal Pradesh under Chip-to-Start-Up (C2S) Project sponsored by MeitY, Government of India, Ministry of Electronics and Information Technology (MeitY), Government of India through the C2S Project, Visvesvaraya Young Faculty Research Fellowship (YFRF)..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents HexLock, a compact and energy-efficient application-specific integrated circuit (ASIC)-based digital locking system that employs a 4-bit hexadecimal key architecture for secure hardware-level access control in embedded and consumer electronic applications. Unlike traditional microcontroller-based locks, it eliminates firmware dependencies and operates using fully synchronous, power gated digital logic, significantly reducing power and area overhead. The system accepts parallel 16-bit binary key input or 4-bit sequential hexadecimal key inputs, and verifies them through a pipelined xor-or logic against a configurable stored code, enforcing tamper resistance via an on-chip false attempt counter and early mismatch termination logic. Designed and verified on Semi-Conductor Laboratory (SCL) 180 nm CMOS node, HexLock records a core layout area of 0.35 mm 2 and postlayout delay of 4.5 ns along with dormant and active power consumption of $4.76 ~\mu $ W and 0.15 mW, respectively, under typical operating conditions. Functional validation across full PVT corners (from $- 20~ ^{\circ }$ C to $120~ ^{\circ }$ C) confirms reliable operation up to 85 MHz. HexLock achieves substantially lower active power and a smaller silicon footprint compared to standard microcontroller unit (MCU) and field-programmable gate array (FPGA) based locking alternatives, thereby eliminating firmware dependencies through hardware-only authentication. These properties make HexLock a practical candidate for integration in smart locks, Internet of Things (IoT) platforms, and safety-critical consumer systems.

Förderung

  • Integrated Circuit and System (i-CAS) Laboratory, NIT Arunachal Pradesh under Chip-to-Start-Up (C2S) Project sponsored by MeitY, Government of India
  • Ministry of Electronics and Information Technology (MeitY), Government of India through the C2S Project
  • Visvesvaraya Young Faculty Research Fellowship (YFRF).

Zitieren

APA

Das, B. L., Jiang, W., & Majumder, A. (2026). Compact ASIC Design of a Secure Hexadecimal Digital Lock for Consumer Electronics. IEEE Internet of Things Journal, 13(15), 34056-34066. https://doi.org/10.1109/jiot.2026.3697699

Vancouver

Das BL, Jiang W, Majumder A. Compact ASIC Design of a Secure Hexadecimal Digital Lock for Consumer Electronics. IEEE Internet of Things Journal. 2026;13(15):34056-34066. doi:10.1109/jiot.2026.3697699

BibTeX
@article{Das2026,
  author = {Das, Bhaskar Lal and Jiang, Weiwei and Majumder, Alak},
  title = {Compact ASIC Design of a Secure Hexadecimal Digital Lock for Consumer Electronics},
  journal = {IEEE Internet of Things Journal},
  year = {2026},
  volume = {13},
  number = {15},
  pages = {34056--34066},
  doi = {10.1109/jiot.2026.3697699}
}
Kostenlos starten →