EUVIMEDEUVIMED entdecken
Crossref

Harnessing Digital Twin Technology for Adaptive Traffic Signal Control: Improving Signalized Intersection Performance and User Satisfaction

Sagar Dasgupta, Mizanur Rahman, Steven Jon

IEEE Internet of Things Journal · 15.11.2024 · 11 (22) · 36596-36618

DOI: 10.1109/jiot.2024.3420439 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Internet of Things Journal, erschienen am 15.11.2024. Verfasst von Sagar Dasgupta und 2 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 101 Literaturangaben. Gefördert von: Alabama Transportation Institute, University of Alabama, Tuscaloosa, AL, USA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a digital twin (DT) technology-based adaptive traffic signal control (ATSC) framework is presented for improving signalized intersection performance and user satisfaction. Specifically, real-time vehicle trajectory data, future traffic demand prediction and parallel simulation strategy are considered to develop two DT-based ATSC algorithms, namely, digital twin 1 (DT1) and digital twin 2 (DT2). DT1 uses the delay experienced by each vehicle from all approaches connected to the target intersection, while DT2 uses the delay of each vehicle that occurred in all the approaches connected to the target intersection as well as immediate adjacent intersection. To demonstrate the effectiveness of these algorithms, the DT-based ATSC algorithms are evaluated with varying traffic demands at intersection, and individual user level. Evaluation results show that both DT1 and DT2 performs significantly better compared to the density-based baseline algorithm in terms of control delay reductions ranging from 1% to 52% for low-traffic demands. DT1 outperforms baseline algorithm for moderate traffic demands, achieving reduction in control delay ranging from 3% to 19%, while the performance of DT2 declines with increasing demand. For high-traffic demands, DT1 achieved control delay reduction ranging from 1% to 45% and DT2 achieved 8% to 36% compared to the baseline algorithm. Moreover, DT1 and DT2 effectively distribute the delay per vehicle among all the vehicles, which approach toward intersection, compared to the baseline ATSC algorithm. DT-based ATSC could help to improve user satisfaction by reducing prolonged delays at signalized intersections, specifically, for moderate and high-traffic demands.

Förderung

  • Alabama Transportation Institute, University of Alabama, Tuscaloosa, AL, USA

Zitieren

APA

Dasgupta, S., Rahman, M., & Jon, S. (2024). Harnessing Digital Twin Technology for Adaptive Traffic Signal Control: Improving Signalized Intersection Performance and User Satisfaction. IEEE Internet of Things Journal, 11(22), 36596-36618. https://doi.org/10.1109/jiot.2024.3420439

Vancouver

Dasgupta S, Rahman M, Jon S. Harnessing Digital Twin Technology for Adaptive Traffic Signal Control: Improving Signalized Intersection Performance and User Satisfaction. IEEE Internet of Things Journal. 2024;11(22):36596-36618. doi:10.1109/jiot.2024.3420439

BibTeX
@article{Dasgupta2024,
  author = {Dasgupta, Sagar and Rahman, Mizanur and Jon, Steven},
  title = {Harnessing Digital Twin Technology for Adaptive Traffic Signal Control: Improving Signalized Intersection Performance and User Satisfaction},
  journal = {IEEE Internet of Things Journal},
  year = {2024},
  volume = {11},
  number = {22},
  pages = {36596--36618},
  doi = {10.1109/jiot.2024.3420439}
}
Kostenlos starten →