Analytical Evaluation of Design Tradeoffs in Noise Reduction Techniques for Flexible Electronics
IEEE Journal on Flexible Electronics · 2026-08 · 5 (8) · 312-320
DOI: 10.1109/jflex.2026.3686769 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Journal on Flexible Electronics, 2026-08. Verfasst von Kyle van Oosterhout und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Project Smart-Sense through the Dutch Research Council.
Abstract (Originalsprache)
Thin-film transistors (TFTs) manufactured on flexible substrates are known to exhibit significant low-frequency noise, which poses challenges for their use in low-noise applications such as biosignal acquisition. Due to the temporal correlation inherent in low-frequency noise sources, techniques like chopping, autozeroing, and correlated double sampling (CDS) can be employed to mitigate 1/f noise; an approach well-established in conventional silicon-complementary metal-oxide semiconductor (Si-CMOS) circuit architectures. However, directly applying these methods to TFT-based designs is not straightforward, as the distinct device physics of TFTs introduces unique design tradeoffs. This work presents an analytical investigation of these tradeoffs for a commercial a-IGZO TFT technology on a flexible substrate. It offers a set of equations that clarify the performance limits and design considerations for implementing noise reduction techniques in TFT circuits, showing it is most noise-efficient to use the minimal switching frequency of the noise reduction technique that satisfies the noise requirements. Furthermore, while chopping is the easiest technique to implement and very effective, it reduces the input impedance of the system the most, while with autozeroing, the input impedance can be kept high but at the cost of a reduced gain in the first stage. The analysis is particularly relevant for biomedical applications, where low-noise performance is critical.
Förderung
- Project Smart-Sense through the Dutch Research Council
Zitieren
APA
Oosterhout, K. V., Timmermans, M., Fattori, M., & Cantatore, E. (2026). Analytical Evaluation of Design Tradeoffs in Noise Reduction Techniques for Flexible Electronics. IEEE Journal on Flexible Electronics, 5(8), 312-320. https://doi.org/10.1109/jflex.2026.3686769
Vancouver
Oosterhout KV, Timmermans M, Fattori M, Cantatore E. Analytical Evaluation of Design Tradeoffs in Noise Reduction Techniques for Flexible Electronics. IEEE Journal on Flexible Electronics. 2026;5(8):312-320. doi:10.1109/jflex.2026.3686769
BibTeX
@article{Oosterhout2026,
author = {Oosterhout, Kyle van and Timmermans, Martijn and Fattori, Marco and Cantatore, Eugenio},
title = {Analytical Evaluation of Design Tradeoffs in Noise Reduction Techniques for Flexible Electronics},
journal = {IEEE Journal on Flexible Electronics},
year = {2026},
volume = {5},
number = {8},
pages = {312--320},
doi = {10.1109/jflex.2026.3686769}
}
EUVIMED