Frequency Response Preserving Metasurface Design for SNR Enhancement in RF Coil
IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology · 2026-09 · 10 (3) · 498-508
DOI: 10.1109/jerm.2026.3699378 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology, 2026-09. Verfasst von Muhammadreza Asgari und 1 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Iran National Science Foundation.
Abstract (Originalsprache)
This study aimed to design, fabricate, and evaluate a large metasurface to significantly enhance the signal-to-noise ratio (SNR) of a commercial rat head coil across a relatively large region within the coil’s field of view, as well as a novel device called a frequency response compensator (FRC) to compensate for the coil detuning induced by metasurface integration. The geometries of both the metasurface and FRC were analyzed and optimized using full-wave electromagnetic simulations in CST Studio Suite. Both components were fabricated from capacitively loaded copper loops printed on a flexible dielectric substrate. The metasurface, configured as a rectangular loop, was positioned between the rat coil and the phantom, while the FRC—comprising two rectangular loops with tunable capacitors—was placed above the coil and wirelessly coupled to it. The enhancement in SNR was then simulated and experimentally measured to validate the effectiveness of these designs. Benchtop measurements showed that integrating the metasurface with the rat coil increased the SNR by up to 77% at the mouse-brain location (MBL), but required manual coil retuning due to the altered frequency response. Incorporating the FRC subsequently improved the SNR by up to 65% at the MBL and restored the coil’s frequency response. These consistent enhancements, confirmed by both simulation and experimental data, indicate that the developed metasurface and FRC provide a promising approach for improving the RF coil’s SNR without altering its frequency response.
Förderung
- Iran National Science Foundation
Zitieren
APA
Asgari, M., & Mohammadzadeh, M. (2026). Frequency Response Preserving Metasurface Design for SNR Enhancement in RF Coil. IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology, 10(3), 498-508. https://doi.org/10.1109/jerm.2026.3699378
Vancouver
Asgari M, Mohammadzadeh M. Frequency Response Preserving Metasurface Design for SNR Enhancement in RF Coil. IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology. 2026;10(3):498-508. doi:10.1109/jerm.2026.3699378
BibTeX
@article{Asgari2026,
author = {Asgari, Muhammadreza and Mohammadzadeh, Mohammad},
title = {Frequency Response Preserving Metasurface Design for SNR Enhancement in RF Coil},
journal = {IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology},
year = {2026},
volume = {10},
number = {3},
pages = {498--508},
doi = {10.1109/jerm.2026.3699378}
}
EUVIMED