An 80.5-dB SNDR SC-Based Passive Error-Feedback Noise-Shaping SAR ADC With Mismatch Error Shaping Incorporating 3-Level Analog Prediction for Battery Management System
IEEE Access · 2026 · 14 · 169548-169558
DOI: 10.1109/access.2026.3749264 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Sanghyun Kwak und 4 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Development Program of the Ministry of Trade, Industry, and Energy (MOTIE), South Korea, and Korea Evaluation Institute of Industrial Technology, Korea Collaborative and High-Tech Initiative for Prospective Semiconductor Research, MOTIE.
Abstract (Originalsprache)
This paper presents a noise-shaping successive-approximation-register (NS-SAR) analog-to-digital converter (ADC) for high-resolution and low-power battery-monitoring applications. The proposed ADC combines a charge-summation-based error-feedback loop with a multi-stage switched capacitor passive amplifier to achieve quantization noise shaping without power-hungry active integrators. Since the loop gain is passively defined by capacitor ratios, the proposed NS-SAR still maintains scaling-friendly characteristics of SAR ADC while exhibiting robustness against process, supply-voltage, and temperature (PVT) variations. To suppress capacitor-mismatch-induced nonlinearity, a first-order mismatch error shaping (MES) scheme is employed. To alleviate the input dynamic-range loss caused by the MES, a 3-level analog-prediction-assisted compensation technique is proposed. The ADC, fabricated in a 180-nm CMOS process, shows an SNDR of 80.5 dB, an SFDR of 84.21 dB, and an ENOB of 13.08 bits over a 3.5-kHz bandwidth, while consuming $92.4~\mu $ W at a supply of 3.3 V. The ADC supports a differential input range of $\pm ~2.5$ V to accommodate the open circuit voltage range of conventional battery cells in the battery management system (BMS). In addition, battery cell voltage measurement results show an error within ±1 mV over the tested open circuit voltage range, demonstrating that the proposed NS-SAR ADC is well-suited for high-accuracy and energy-efficient battery-monitoring ICs in applications of electric-vehicle BMS or energy storage systems (ESS).
Förderung
- Research and Development Program of the Ministry of Trade, Industry, and Energy (MOTIE), South Korea, and Korea Evaluation Institute of Industrial Technology
- Korea Collaborative and High-Tech Initiative for Prospective Semiconductor Research
- MOTIE
- National Research Foundation of Korea
- Korea government
Zitieren
APA
Kwak, S., Seo, D., Choi, K., Koo, J., & Jeon, C. (2026). An 80.5-dB SNDR SC-Based Passive Error-Feedback Noise-Shaping SAR ADC With Mismatch Error Shaping Incorporating 3-Level Analog Prediction for Battery Management System. IEEE Access, 14, 169548-169558. https://doi.org/10.1109/access.2026.3749264
Vancouver
Kwak S, Seo D, Choi K, Koo J, Jeon C. An 80.5-dB SNDR SC-Based Passive Error-Feedback Noise-Shaping SAR ADC With Mismatch Error Shaping Incorporating 3-Level Analog Prediction for Battery Management System. IEEE Access. 2026;14:169548-169558. doi:10.1109/access.2026.3749264
BibTeX
@article{Kwak2026,
author = {Kwak, Sanghyun and Seo, Dongwoo and Choi, Kyujin and Koo, Jahyun and Jeon, Cheonhoo},
title = {An 80.5-dB SNDR SC-Based Passive Error-Feedback Noise-Shaping SAR ADC With Mismatch Error Shaping Incorporating 3-Level Analog Prediction for Battery Management System},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {169548--169558},
doi = {10.1109/access.2026.3749264}
}
EUVIMED