Boost Power Converter Meets LED Lighting: Analysis and Experimental Validation of a Double-Loop PI-Like Controller
IEEE Access · 2026 · 14 · 122116-122132
DOI: 10.1109/access.2026.3722117 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von German De La Cruz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría de Investigación y Posgrado (SIP), Instituto Politécnico Nacional (IPN), Mexico.
Abstract (Originalsprache)
Light Emitting Diode (LED) devices now constitute a critical infrastructure for modern lighting applications, implemented from urban development to specialized industrial systems. Although most control strategies focus primarily on current and voltage regulation, this study consider the level of illuminance as the main control variable. This work proposes an extended cascade control scheme featuring a passivity-based proportional integral controller with a disturbance observer (PBC+DO) in the inner loop, combined with a PI–like controller in the outer loop. This scheme explicitly considers the duty-cycle saturation, which is a relevant constraint in practical LED applications. As a second contribution, the illuminance control problem is experimentally evaluated through four representative scenarios. Validation is conducted using an instrumented DC–DC boost power converter (operating at 100 kHz with a 60 W nominal load), commercial LED lamps, and an optical sensor arrangement to compare the proposed strategy with other double-loop controllers and a single-loop algorithm. The quantitative results highlight the advantages of the proposed approach during startup transients, achieving a settling time of 1.79 s (faster than the 3.6 s required by the conventional single-loop approach) and limiting overshoot to 2.91%. Furthermore, under external disturbances, the scheme effectively recovered and maintained a steady-state illuminance error within a ±5% tolerance band. In terms of the energy performance, the proposed system achieved an outstanding nominal efficiency of 99.68%. The results demonstrate that by taking advantage of the timescale separation between the fast boost electrical dynamics and the slow illuminance dynamics, the proposed double-loop scheme can effectively reject disturbances without explicitly modeling the nonlinear constant power load (CPL) characteristics of the LED devices. These findings establish the proposed control architecture as an effective solution for regulating high-performance illuminance under realistic operating conditions.
Förderung
- Secretaría de Investigación y Posgrado (SIP), Instituto Politécnico Nacional (IPN), Mexico
Zitieren
APA
Cruz, G. D. L., Martinez-Lopez, M., & Moreno-Valenzuela, J. (2026). Boost Power Converter Meets LED Lighting: Analysis and Experimental Validation of a Double-Loop PI-Like Controller. IEEE Access, 14, 122116-122132. https://doi.org/10.1109/access.2026.3722117
Vancouver
Cruz GDL, Martinez-Lopez M, Moreno-Valenzuela J. Boost Power Converter Meets LED Lighting: Analysis and Experimental Validation of a Double-Loop PI-Like Controller. IEEE Access. 2026;14:122116-122132. doi:10.1109/access.2026.3722117
BibTeX
@article{Cruz2026,
author = {Cruz, German De La and Martinez-Lopez, Mizraim and Moreno-Valenzuela, Javier},
title = {Boost Power Converter Meets LED Lighting: Analysis and Experimental Validation of a Double-Loop PI-Like Controller},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {122116--122132},
doi = {10.1109/access.2026.3722117}
}
EUVIMED