Drive-Cycle-Based System-Level Optimization of an IPMSM Traction Motor Considering Vibration-Induced Loss and Fuel Economy
IEEE Access · 2026 · 14 · 113982-113998
DOI: 10.1109/access.2026.3716708 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Jeong-Yoon Park und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electric vehicle traction motors are commonly designed based on peak efficiency or rated operating conditions, despite the highly non-uniform distribution of operating points encountered in real driving cycles. As a result, conventional approaches often fail to capture the operating regions that predominantly govern energy consumption and vibration behavior at the vehicle level. This paper presents a drive-cycle-based traction motor design framework that integrates electromagnetic finite element analysis with vehicle-level dynamic simulation. Representative operating points are extracted using an Energy Center of Gravity (ECG) analysis derived from the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), and their efficiency values are incorporated into a fuel economy model via natural neighbor interpolation over the speed–torque plane. The resulting ECG-based fuel economy metric is employed as the objective function in a metamodel-based optimization of an interior permanent magnet synchronous motor, subject to constraints on vibration acceleration level, average torque, and phase voltage. The optimized design is validated through finite element re-analysis and a CarMaker–Simulink co-simulation platform. The results demonstrate a 3.99% improvement in fuel economy and a 10.49% reduction in torque ripple at the rated operating point. Vehicle-level analysis further indicates that torque ripple reduction contributes to reduced vibration transmission through the driveline and is associated with lower energy dissipation at the vehicle level. Energy decomposition analysis shows that improvements in electromagnetic efficiency and reductions in system-level energy consumption jointly contribute to the observed fuel economy enhancement. These findings highlight that fuel economy improvement is influenced not only by efficiency gains at energy-dominant operating points but also by system-level effects associated with torque ripple mitigation. The proposed framework therefore provides a system-level design methodology that consistently translates motor-level electromagnetic characteristics into vehicle-level energy and NVH performance under realistic driving conditions.
Zitieren
APA
Park, J., Kim, S., & You, Y. (2026). Drive-Cycle-Based System-Level Optimization of an IPMSM Traction Motor Considering Vibration-Induced Loss and Fuel Economy. IEEE Access, 14, 113982-113998. https://doi.org/10.1109/access.2026.3716708
Vancouver
Park J, Kim S, You Y. Drive-Cycle-Based System-Level Optimization of an IPMSM Traction Motor Considering Vibration-Induced Loss and Fuel Economy. IEEE Access. 2026;14:113982-113998. doi:10.1109/access.2026.3716708
BibTeX
@article{Park2026,
author = {Park, Jeong-Yoon and Kim, Se-Eun and You, Yong-Min},
title = {Drive-Cycle-Based System-Level Optimization of an IPMSM Traction Motor Considering Vibration-Induced Loss and Fuel Economy},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {113982--113998},
doi = {10.1109/access.2026.3716708}
}
EUVIMED