Model-Based Adaptive Cruise Control With Real-Time Hardware Validation in Stop-and-Go Traffic
IEEE Access · 2026 · 14 · 114441-114456
DOI: 10.1109/access.2026.3716361 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Sai Santhosh Rao Kotha und 3 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Faculty Scheme at Indian Institute of Technology (IIT) Madras.
Abstract (Originalsprache)
Stop-and-go traffic with the increased risk of low-speed rear-end collisions is a challenging control problem. Frequent throttle-brake switching in low-speed conditions with added actuator delays often leads to oscillatory behavior in conventional adaptive cruise control (ACC) implementations. Ensuring passenger comfort while maintaining safety margins also becomes a challenge due to conflicting requirements. This paper presents a low-speed ACC framework based on a model predictive controller (MPC) for an electric vehicle with custom drive-by-wire and brake-by-wire systems. A control-oriented longitudinal model is developed from vehicle data collection trials to capture low-speed throttle dynamics for use in the predictive control framework. The proposed constrained MPC framework optimizes the inter-vehicle spacing and speed tracking while explicitly enforcing acceleration, velocity, and jerk limits. Collision avoidance is further strengthened by adding a Control Barrier Function (CBF) constraint within the MPC formulation. The proposed model-based adaptive cruise controller framework is compared against a baseline PD controller in a high-fidelity simulation. The comparison is further extended through real-world validation on the experimental vehicle equipped with a radar-based sensing module and custom by-wire control. Validation is conducted over representative low-speed following and complete-stop maneuvers in the presence of a manually driven traffic vehicle. The results show that MPC significantly reduces low-speed oscillations and improves ride comfort, achieving a 27–42% lower mean jerk and a 9–17% lower RMS acceleration than PD in the maneuvers tested, while maintaining collision-free operation and stable standstill behavior. In complete-stop tests, MPC also reduces traction energy by 32.7–47.0% relative to manual driving. These findings demonstrate a practical and scalable pathway to reliable ACC using the MPC formulation, especially in low-speed urban driving applications.
Förderung
- New Faculty Scheme at Indian Institute of Technology (IIT) Madras
Zitieren
APA
Kotha, S. S. R., K, K., Selvaraj, G., & Sebastian, B. (2026). Model-Based Adaptive Cruise Control With Real-Time Hardware Validation in Stop-and-Go Traffic. IEEE Access, 14, 114441-114456. https://doi.org/10.1109/access.2026.3716361
Vancouver
Kotha SSR, K K, Selvaraj G, Sebastian B. Model-Based Adaptive Cruise Control With Real-Time Hardware Validation in Stop-and-Go Traffic. IEEE Access. 2026;14:114441-114456. doi:10.1109/access.2026.3716361
BibTeX
@article{Kotha2026,
author = {Kotha, Sai Santhosh Rao and K, Kannikeshwwar and Selvaraj, Gunabharathi and Sebastian, Bijo},
title = {Model-Based Adaptive Cruise Control With Real-Time Hardware Validation in Stop-and-Go Traffic},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {114441--114456},
doi = {10.1109/access.2026.3716361}
}
EUVIMED