Soft Suction Gripper With Flexible Wing Structures for Gripping Hollow Irregularly Shaped Objects
IEEE Access · 2026 · 14 · 106436-106450
DOI: 10.1109/access.2026.3712140 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Daehyun Kim und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea, Nano and Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT.
Abstract (Originalsprache)
Despite the recent improvements and wide spread of robotic applications, there are still limitations in meeting the increasing demand for grippers capable of gripping thin and irregularly shaped objects. Especially, handle-shaped objects, which consist of a thin and irregular rod structure with a hollow space underneath, are difficult to grip with conventional grippers. For example, a mechanical jaw gripper has problems with the object’s small contact area on the irregular and thin lateral surface, and a suction gripper has problems with the narrow and rounded upper surface where the gripper can adhere. These distinctive morphological characteristics of handles make them difficult for general grippers to grip. This is because most handles are considered only for ergonomic design for humans, so high degree-of-freedom dexterous robot hands with complex human-mimetic motion have been required. To manipulate these handle-shaped irregular objects, which consist of a hollow space underneath the thin structure, this paper proposes a soft suction gripper equipped with flexible wing structures. In the proposed gripper, when contact with an object occurs, embedded wires induce deformation of the flexible wing structures to wrap around the handle-shaped object, multiplying the gripping forces by reaching even underneath the upper surface. Through this gripping mechanism, the proposed gripper is capable of reliably gripping various handle-shaped objects with irregular and uneven surfaces, as well as delicately manipulating the inlet cover of an electric car during the charging sequence.
Förderung
- Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea
- Nano and Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT
Zitieren
APA
Kim, D., Bak, J., Do, H., & Song, S. (2026). Soft Suction Gripper With Flexible Wing Structures for Gripping Hollow Irregularly Shaped Objects. IEEE Access, 14, 106436-106450. https://doi.org/10.1109/access.2026.3712140
Vancouver
Kim D, Bak J, Do H, Song S. Soft Suction Gripper With Flexible Wing Structures for Gripping Hollow Irregularly Shaped Objects. IEEE Access. 2026;14:106436-106450. doi:10.1109/access.2026.3712140
BibTeX
@article{Kim2026,
author = {Kim, Daehyun and Bak, Jeongae and Do, Hyunmin and Song, Sung-Hyuk},
title = {Soft Suction Gripper With Flexible Wing Structures for Gripping Hollow Irregularly Shaped Objects},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {106436--106450},
doi = {10.1109/access.2026.3712140}
}
EUVIMED