Effect of Busbar Geometry on the Temperature During High-Current Charge Process: Experiments and Numerical Simulations
IEEE Access · 2026 · 14 · 103594-103603
DOI: 10.1109/access.2026.3710789 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Quang-Hat Cao und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Hydro and Nuclear Power Company through the project “Nuclear Innovation Center for Haeoleum Alliance.”.
Abstract (Originalsprache)
Lithium-ion (Li-ion) batteries are widely used in EVs and HEVs due to their high energy density, safety, and long life. They operate between $- 40~^{\circ }$ C and $60~^{\circ }$ C, with optimal performance at 25– $40~^{\circ }$ C; extreme temperatures or gradients above $5~^{\circ }$ C cause degradation and thermal-runaway risks. This study investigates the thermal behavior of busbars in EV battery packs using both experimental measurements and numerical simulations. A one-dimensional lumped thermo-electric model is developed in Siemens AMESim, while three-dimensional fluid–thermal behavior is analyzed using the finite volume method in ANSYS Fluent. The 1D and 3D simulation results are validated against experimental data, with a maximum percentage error remaining below 12%. The effect of design parameters adapt length (distance from the terminal tab to the busbar connector) and adapt cross section (area perpendicular to the current flow) and operating conditions (charging rate and ambient temperature) on busbar and battery module temperature are systematically examined. Simulation results validated against experimental data demonstrate that increasing the adapt cross section by 20% can reduce the busbar temperature up to 9°. Moreover, for a given cross-sectional area longer busbars (87 mm) exhibit higher temperatures compared to shorter ones (33 mm). The result indicates that busbar B with adapt length of 35 and cross-sectional area of 72mm achieves the lowest temperature. At a 2C charging rate, the maximum busbar reaches approximately $97~^{\circ }$ C under an ambient temperature of $24~^{\circ }$ C. In contrast, variations in busbar geometry have a negligible effect on the battery module temperature.
Förderung
- Korea Hydro and Nuclear Power Company through the project “Nuclear Innovation Center for Haeoleum Alliance.”
Zitieren
APA
Cao, Q., Akhtar, S., Choi, W., Lee, D., Mun, H., Moon, Y., & Lee, S. (2026). Effect of Busbar Geometry on the Temperature During High-Current Charge Process: Experiments and Numerical Simulations. IEEE Access, 14, 103594-103603. https://doi.org/10.1109/access.2026.3710789
Vancouver
Cao Q, Akhtar S, Choi W, Lee D, Mun H, Moon Y, et al. Effect of Busbar Geometry on the Temperature During High-Current Charge Process: Experiments and Numerical Simulations. IEEE Access. 2026;14:103594-103603. doi:10.1109/access.2026.3710789
BibTeX
@article{Cao2026,
author = {Cao, Quang-Hat and Akhtar, Shehnaz and Choi, Wooyoung and Lee, Dongryun and Mun, Hokyun and Moon, Yunho and Lee, Sang-Wook},
title = {Effect of Busbar Geometry on the Temperature During High-Current Charge Process: Experiments and Numerical Simulations},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {103594--103603},
doi = {10.1109/access.2026.3710789}
}
EUVIMED