Conductive-Embroidered Logo Antenna for Wearable Passive UHF RFID Tags
IEEE Access · 2026 · 14 · 102920-102928
DOI: 10.1109/access.2026.3710625 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Dairoku Muramatsu und 2 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Baroque Murai Hiroyuki Foundation, Foundation for Interaction in Science & Technology, Murata Science and Education Foundation, and Japan Society for the Promo….
Abstract (Originalsprache)
Passive ultrahigh-frequency (UHF) radio-frequency identification (RFID) tags are promising for clothing-integrated identification and sensing, but conventional add-on antennas can impair apparel aesthetics, comfort, and maintainability. This paper proposes a conductive-embroidered logo antenna in which a clothing logo itself serves as the radiating element of a passive UHF RFID tag. The antenna is designed for 920-MHz on-body operation using electromagnetic field analysis with a three-layer numerical human phantom. To preserve the logo appearance, the operating band is adjusted by the logo diameter, feed position, and a back-side parasitic element while maintaining the relative arrangement of the logo components. The optimized design with a logo diameter of 124 mm resonates near 917 MHz and exhibits a forward realized gain of −4.4 dBi at 920 MHz. A prototype was embroidered directly on a cotton T-shirt using conductive thread and evaluated under worn conditions. The measured reflection coefficient also resonated near 917 MHz, confirming that the numerical model captures the basic resonance mechanism, although the measured resonance was shallower because of the effective electrical properties of the embroidered structure. With an Alien H3 tag IC, the prototype achieved an average worn read range of 139 cm, 40% longer than that of a commercial meandered-dipole tag measured under the same reader setup. The read-range-derived realized gain was −7.4 dBi, and most of the 3.0-dB difference from analysis was attributable to a 2.45-dB increase in mismatch loss. Comparison with existing wearable UHF RFID tag antennas highlights the advantage of combining practical read performance with preserved logo aesthetics.
Förderung
- Baroque Murai Hiroyuki Foundation, Foundation for Interaction in Science & Technology, Murata Science and Education Foundation, and Japan Society for the Promo…
Zitieren
APA
Muramatsu, D., Sasaki, Y., & Kodama, M. (2026). Conductive-Embroidered Logo Antenna for Wearable Passive UHF RFID Tags. IEEE Access, 14, 102920-102928. https://doi.org/10.1109/access.2026.3710625
Vancouver
Muramatsu D, Sasaki Y, Kodama M. Conductive-Embroidered Logo Antenna for Wearable Passive UHF RFID Tags. IEEE Access. 2026;14:102920-102928. doi:10.1109/access.2026.3710625
BibTeX
@article{Muramatsu2026,
author = {Muramatsu, Dairoku and Sasaki, Yukino and Kodama, Miyu},
title = {Conductive-Embroidered Logo Antenna for Wearable Passive UHF RFID Tags},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {102920--102928},
doi = {10.1109/access.2026.3710625}
}
EUVIMED