Transient Thermal Modeling and Junction Temperature Control for High-Inertia Energy Storage Synchronous Condenser Converters
IEEE Access · 2026 · 14 · 104090-104104
DOI: 10.1109/access.2026.3710007 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Jinxin Ouyang und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program.
Abstract (Originalsprache)
Thermal reliability of high-power power electronic devices under dynamic loading is a key bottleneck that limits the short-term overload capability of grid-connected equipment. A high-inertia energy storage synchronous condenser (HI-ES-SC) can provide coordinated active and reactive power support, but variable-frequency operation at large slip causes rapid rotor-current magnitude-frequency variations. The resulting redistribution of conduction and switching losses leads to pronounced junction-temperature fluctuations. This paper develops a transient thermal network model for the HI-ES-SC converter to capture junction-temperature dynamics driven by rotor-current magnitude–frequency coupling. A junction-temperature safe operating region is then constructed with active and reactive powers as state variables, and an active–reactive coordinated voltage-support controller is designed by directly enforcing this region as a constraint. In simulations where the maximum operating temperature of the Integrated Gate-Commutated Thyristor (IGCT) is $110~^{\circ }$ C, a conventional current-limiting approach can produce an over-temperature peak of $116.2~^{\circ }$ C, whereas the proposed strategy confines the peak junction temperature to $108.4~^{\circ }$ C. Moreover, the voltage-support effectiveness is improved by more than 32.8% across different voltage-sag severities. These results indicate that thermal-state-aware control can enhance voltage recovery while mitigating thermal stress and reducing the risk of thermally induced failures.
Förderung
- National Key Research and Development Program
Zitieren
APA
Ouyang, J., & Lin, Y. (2026). Transient Thermal Modeling and Junction Temperature Control for High-Inertia Energy Storage Synchronous Condenser Converters. IEEE Access, 14, 104090-104104. https://doi.org/10.1109/access.2026.3710007
Vancouver
Ouyang J, Lin Y. Transient Thermal Modeling and Junction Temperature Control for High-Inertia Energy Storage Synchronous Condenser Converters. IEEE Access. 2026;14:104090-104104. doi:10.1109/access.2026.3710007
BibTeX
@article{Ouyang2026,
author = {Ouyang, Jinxin and Lin, Yaowei},
title = {Transient Thermal Modeling and Junction Temperature Control for High-Inertia Energy Storage Synchronous Condenser Converters},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {104090--104104},
doi = {10.1109/access.2026.3710007}
}
EUVIMED