EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bird-Inspired Topological Design and Modular Dynamic Modeling of a Multi-Loop Closed-Chain Morphing Wing Mechanism

Ran Cheng, Zhiyuan Yu, Hongzhou Song, Shihao Mao, Zixing Wang

IEEE Access · 2026 · 14 · 96794-96814

DOI: 10.1109/access.2026.3706334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Ran Cheng und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the demand for wing-planform regulation in reusable launch vehicles (RLVs) over a wide flight-speed range, compound morphing wing mechanisms must coordinate sweep variation and representative planform-scale adjustment within limited internal actuation space. For such mechanisms, multi-loop closed-chain coupling, shared-link interactions, and active-space projection of local pin-joint damping are critical to actuator-force prediction under combined loading. This study proposes a bird-inspired, dual-slider-actuated, multi-loop closed-chain planar compound morphing wing mechanism and develops a modular inverse dynamics model consistent with its topological decomposition. Inspired by elbow–wrist folding in the anterior wing region of the peregrine falcon and deployment of distal phalanges and feather-supporting structures in the posterior wing region, the mechanism is decomposed into a leading-edge sweep-control module, a rear slider-supported chain, and a scissor-type variable-area module. With the two slider displacements as minimal active coordinates, a closed-chain kinematic model with one parent loop and three functional subloops is established. Using the principle of virtual work, inertial terms, in-plane external loads, and local dissipative terms are projected into the dual-actuator active space. For time-varying pin-joint damping inputs, a generalized damping-force formulation based on the local relative-rotation Jacobian is derived. Simulation comparisons show good agreement with a multibody dynamics model under no-load and isolated chordwise-load conditions. Under combined loading and the same damping-input boundary, the improved damping-projection model reconstructs the dual-actuator force histories more accurately than a conventional actuator-side equivalent damping model.

Förderung

  • Zhejiang Provincial Natural Science Foundation of China

Zitieren

APA

Cheng, R., Yu, Z., Song, H., Mao, S., & Wang, Z. (2026). Bird-Inspired Topological Design and Modular Dynamic Modeling of a Multi-Loop Closed-Chain Morphing Wing Mechanism. IEEE Access, 14, 96794-96814. https://doi.org/10.1109/access.2026.3706334

Vancouver

Cheng R, Yu Z, Song H, Mao S, Wang Z. Bird-Inspired Topological Design and Modular Dynamic Modeling of a Multi-Loop Closed-Chain Morphing Wing Mechanism. IEEE Access. 2026;14:96794-96814. doi:10.1109/access.2026.3706334

BibTeX
@article{Cheng2026,
  author = {Cheng, Ran and Yu, Zhiyuan and Song, Hongzhou and Mao, Shihao and Wang, Zixing},
  title = {Bird-Inspired Topological Design and Modular Dynamic Modeling of a Multi-Loop Closed-Chain Morphing Wing Mechanism},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {96794--96814},
  doi = {10.1109/access.2026.3706334}
}
Kostenlos starten →