EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Coil Wireless Power Transfer Design for High Resistance Biodegradable Receiver Coil

Chanho An, Hwamok Park, Joo-Hyeon Park, Seung-Kyun Kang, Seung Kwon Seol, Hyunchul Ku

IEEE Access · 2026 · 14 · 96108-96119

DOI: 10.1109/access.2026.3706081 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Chanho An und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Government of Republic of Korea, Konkuk University Research Support Program for its faculty on Sabbatical leave in 2025.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents the first demonstration of a biodegradable RX coil fabricated from a Zn–PCL composite for wireless power transfer (WPT) and analyzes the impact of its low quality factor (low-Q) on power transfer efficiency (PTE), which has not been previously reported. The use of composite inks enables conformal and freeform coil fabrication through direct ink writing (DIW) 3D printing. However, the high parasitic resistance of biodegradable metals results in a low-Q, which significantly degrades efficiency in conventional two-coil WPT systems. To address this limitation, a relay-assisted three-coil architecture is employed to mitigate the inherently low-Q characteristics of the biodegradable receiver coil, and its efficiency improvement is evaluated in comparison with a conventional two-coil configuration at the 6.78 MHz ISM band. Circuit simulations, theoretical analyses, and measurements with printed biodegradable coils confirm that the three-coil design achieves higher efficiency compared to the two-coil case. Measurement results show that the proposed system achieves 51% PTE in free space and delivers 4.9 mW of received power through a 12 mm thick biological tissue phantom using biodegradable coils, establishing the feasibility of biodegradable 3D printed coils for wireless powering of implantable biomedical devices.

Förderung

  • National Research Foundation of Korea
  • Government of Republic of Korea
  • Konkuk University Research Support Program for its faculty on Sabbatical leave in 2025

Zitieren

APA

An, C., Park, H., Park, J., Kang, S., Seol, S. K., & Ku, H. (2026). Three-Coil Wireless Power Transfer Design for High Resistance Biodegradable Receiver Coil. IEEE Access, 14, 96108-96119. https://doi.org/10.1109/access.2026.3706081

Vancouver

An C, Park H, Park J, Kang S, Seol SK, Ku H. Three-Coil Wireless Power Transfer Design for High Resistance Biodegradable Receiver Coil. IEEE Access. 2026;14:96108-96119. doi:10.1109/access.2026.3706081

BibTeX
@article{An2026,
  author = {An, Chanho and Park, Hwamok and Park, Joo-Hyeon and Kang, Seung-Kyun and Seol, Seung Kwon and Ku, Hyunchul},
  title = {Three-Coil Wireless Power Transfer Design for High Resistance Biodegradable Receiver Coil},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {96108--96119},
  doi = {10.1109/access.2026.3706081}
}
Kostenlos starten →