A ROS-Based Multi-Camera Framework for Real-Time 3-D Structural Displacement Tracking
IEEE Access · 2026 · 14 · 72136-72150
DOI: 10.1109/access.2026.3692387 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Ammar Ajmal und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research and Development Project for Smart Construction Technology, Korea Agency for Infrastructure Technology Advancement, Ministry of Land, Infrastructure and Transport, and managed by Korea Expressway Corporation.
Abstract (Originalsprache)
Structural Health Monitoring (SHM) requires precise displacement measurements to ensure infrastructure safety and longevity. Vision-based methods offer a scalable, non-contact solution but are often constrained by synchronization and real-time processing challenges. This paper presents a Robot Operating System (ROS)-based framework for real-time 3D displacement tracking that leverages software-synchronized multi-camera systems and AprilTag fiducial pose estimation. The framework makes three tightly coupled contributions: 1) an end-to-end software synchronization pipeline that integrates host clock discipline, SDK capture-time timestamp propagation, and middleware tuple formation for real-time cross-host camera alignment without specialized hardware or post-hoc alignment; 2) a scalable architecture for distributed, multi-point tracking; and 3) a modular real-time pipeline enabling parallel acquisition and extensibility. In the primary LDS-referenced displacement validation experiments, the system achieved sub-millimeter accuracy for the validated in-plane displacement components (RMSE 0.14–0.40 mm) and maintained residual timing offsets below 5 ms across the tested configurations. Additional repeated-run LDS-referenced sinusoidal tests further confirmed repeatable best-view performance across excitation frequencies, with best-view mean RMSEs ranging from 0.096 to 0.261 mm. Subsequent modal testing verified relative frequency errors under 4% across all modes and MAC values exceeding 0.85 for the first four modes. These results demonstrate that consumer-grade cameras, when combined with software-only synchronization, can provide laboratory-grade precision in compact, field-oriented setups for real-time displacement tracking.
Förderung
- National Research and Development Project for Smart Construction Technology
- Korea Agency for Infrastructure Technology Advancement
- Ministry of Land, Infrastructure and Transport, and managed by Korea Expressway Corporation
- Korea Expressway Corporation
Zitieren
APA
Ajmal, A., Mehmood, T., Won, J., & Shim, C. (2026). A ROS-Based Multi-Camera Framework for Real-Time 3-D Structural Displacement Tracking. IEEE Access, 14, 72136-72150. https://doi.org/10.1109/access.2026.3692387
Vancouver
Ajmal A, Mehmood T, Won J, Shim C. A ROS-Based Multi-Camera Framework for Real-Time 3-D Structural Displacement Tracking. IEEE Access. 2026;14:72136-72150. doi:10.1109/access.2026.3692387
BibTeX
@article{Ajmal2026,
author = {Ajmal, Ammar and Mehmood, Tahir and Won, Jongbin and Shim, Changsu},
title = {A ROS-Based Multi-Camera Framework for Real-Time 3-D Structural Displacement Tracking},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {72136--72150},
doi = {10.1109/access.2026.3692387}
}
EUVIMED