EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Lightweight Design on Structural Dynamics and Actuation Energy Demand in Hydraulically Actuated Flexible Systems

Tirtha Sen Gupta, Aleksi Härkönen, Dominik Walica, Qasim Khadim, Antti Ahola, Emil Kurvinen

IEEE Access · 2026 · 14 · 61131-61149

DOI: 10.1109/access.2026.3685390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Tirtha Sen Gupta und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland through the Virtual Material Engineering (VIIMA) Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Growing demands for productivity, environmental sustainability, energy efficiency, and automation are reshaping the lightweight design of hydraulically actuated heavy machinery. Lightweight structures are often evaluated by static assessments such as deformation and stress, with minimal consideration given to structural dynamics and hydraulic energy consumption. This study introduces a workflow for lightweight and energy-efficient design of hydraulically actuated systems. The workflow utilizes Eurocode constrained structural optimization and flexible multibody dynamic simulation to evaluate design performance. The framework aims to reduce the structural weight of a lift boom through cross-sectional design of steel grades ranging from yield strength of 460-1100 MPa when only in-plane loading was considered. Both default and optimized lift boom were first compared through linear structural analysis to obtain deformation, stresses, natural frequencies and mode shapes. The system’s actuator mechanical work and dynamic performance were then evaluated by flexible multibody dynamic simulation through a simulated work cycle. Lightweighting of the lift boom through the proposed workflow yielded 21.9% weight reduction, with tip deflection increased by 67% and the first mode frequency reduced by 39.3% in the horizontal direction. Dynamic simulation demonstrated that the optimized lift boom required less mechanical work while maintaining similar dynamic response under identical valve command. The proposed workflow addresses current challenges in lightweight design for hydraulically actuated systems and incorporates dynamic simulation feedback to support the evolution of smarter, energy-efficient heavy machinery.

Förderung

  • Business Finland through the Virtual Material Engineering (VIIMA) Project

Zitieren

APA

Gupta, T. S., Härkönen, A., Walica, D., Khadim, Q., Ahola, A., & Kurvinen, E. (2026). Effect of Lightweight Design on Structural Dynamics and Actuation Energy Demand in Hydraulically Actuated Flexible Systems. IEEE Access, 14, 61131-61149. https://doi.org/10.1109/access.2026.3685390

Vancouver

Gupta TS, Härkönen A, Walica D, Khadim Q, Ahola A, Kurvinen E. Effect of Lightweight Design on Structural Dynamics and Actuation Energy Demand in Hydraulically Actuated Flexible Systems. IEEE Access. 2026;14:61131-61149. doi:10.1109/access.2026.3685390

BibTeX
@article{Gupta2026,
  author = {Gupta, Tirtha Sen and Härkönen, Aleksi and Walica, Dominik and Khadim, Qasim and Ahola, Antti and Kurvinen, Emil},
  title = {Effect of Lightweight Design on Structural Dynamics and Actuation Energy Demand in Hydraulically Actuated Flexible Systems},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {61131--61149},
  doi = {10.1109/access.2026.3685390}
}
Kostenlos starten →