Packaging of W-Band Power Amplifier Modules Using Waveguide-Microstrip Line Transition Feeds and High-Isolation Power Combiners
IEEE Access · 2026 · 14 · 61441-61451
DOI: 10.1109/access.2026.3685276 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Ikjong Bae und 6 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Agency for Defense Development.
Abstract (Originalsprache)
This paper presents a packaging technology for efficiently combining the output power of high-power W-band amplifiers. The waveguide power amplifier module with excellent isolation characteristics and low loss is realized using a waveguide-microstrip signal transition feed and a resistive septum applicable to waveguides in the W-band. The waveguide power combiner has a T-junction structure, and the transition feed is located at the $\lambda $ /4 length where the electric field is maximized, and a resistive septum fabricated using a thin-film NiCr layer is inserted in the waveguide. The loss characteristics of the fabricated power combiner were evaluated through a dummy IC implementing a $50~\Omega $ microstrip line. The test module using a dummy IC shows a return loss of more than 20 dB and a combining loss of 0.45 dB with excellent signal isolation of 23 dB at 78 GHz. A power combining module was implemented by applying this to the PA MMIC. A single amplifier module based on waveguide structure has a return loss of more than 20 dB, a gain of 18.3 dB, and maximum output power of 26.2 dBm at 78 GHz. The 2-way combining power amplifier module has a return loss of more than 20 dB, a gain of 17.2 dB, and a maximum output power of 28.4 dBm and the 4-way combining power amplifier module has a return loss of 16 dB and a maximum output power of 30.3 dBm at 78 GHz. As a result, the developed 4-way power combiner exhibits low coupling loss of 2.3 dB and excellent combining gain of 4.1 dB.
Förderung
- Agency for Defense Development
Zitieren
APA
Bae, I., Lee, J., Lee, H., Kim, W., Han, J., Kim, K., & Yook, J. (2026). Packaging of W-Band Power Amplifier Modules Using Waveguide-Microstrip Line Transition Feeds and High-Isolation Power Combiners. IEEE Access, 14, 61441-61451. https://doi.org/10.1109/access.2026.3685276
Vancouver
Bae I, Lee J, Lee H, Kim W, Han J, Kim K, et al. Packaging of W-Band Power Amplifier Modules Using Waveguide-Microstrip Line Transition Feeds and High-Isolation Power Combiners. IEEE Access. 2026;14:61441-61451. doi:10.1109/access.2026.3685276
BibTeX
@article{Bae2026,
author = {Bae, Ikjong and Lee, Ju-Yong and Lee, Hyunbeom and Kim, Wansik and Han, Jaesub and Kim, Kichul and Yook, Jong-Min},
title = {Packaging of W-Band Power Amplifier Modules Using Waveguide-Microstrip Line Transition Feeds and High-Isolation Power Combiners},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {61441--61451},
doi = {10.1109/access.2026.3685276}
}
EUVIMED