A Lightweight PCB Defect Detection Algorithm Based on an Improved YOLOv11s
IEEE Access · 2026 · 14 · 56412-56426
DOI: 10.1109/access.2026.3678967 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Xuhui Ye und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Program of Hubei Provincial Natural Science Foundation, Youth Talent Project of the Science and Technology Research Program of Hubei Provincial Department of Education, Hubei Key Laboratory of Big Data in Science and Technology.
Abstract (Originalsprache)
To address the limited accuracy of existing PCB surface defect detection methods, the challenge of balancing detection performance with lightweight design, and the need for real-time deployment in electronic manufacturing systems, we propose a lightweight PCB defect detection algorithm based on an improved YOLOv11s. First, a lightweight EfficientViT module is introduced into the backbone to replace the original backbone, reducing computational resource usage while enhancing inter-channel information exchange. Second, we integrate FasterNet partial convolution (PConv) with an efficient multi-scale attention mechanism (EMA), and design a C3k2_Faster_EMA convolution to replace standard convolutions in the neck module, further decreasing parameter count and strengthening fine-grained feature extraction. Finally, by combining Inner_IoU auxiliary bounding boxes with the dynamic focusing mechanism of Wise_IoU, we construct an Inner_Wise_IoU loss to replace the original CIoU loss, improving localization accuracy for small targets and bounding-box regression performance. Experiments show that the improved method achieves strong performance on the PKU-Market-PCB and DeepPCB datasets, attaining an mAP of 92.3%. Compared with the original YOLOv11s, parameters are reduced by 61.7%, computational complexity by 63.9%, and model size by 58.3%, down to 8.0MB, while reaching an inference speed of 227.54 FPS. To validate deployment feasibility on edge devices, we deploy the model on the LubanCat-5 platform. The results indicate that the quantized model size is 6.1MB, with an average frame rate of 23.094 FPS and an average inference time of 43.301ms; relative to the non-quantized version, the frame rate increases by 130% and inference time decreases by 56%. These results demonstrate that the proposed model achieves a favorable balance between lightweight design and detection accuracy, offering strong engineering value and practicality for modern electronic manufacturing systems.
Förderung
- General Program of Hubei Provincial Natural Science Foundation
- Youth Talent Project of the Science and Technology Research Program of Hubei Provincial Department of Education
- Hubei Key Laboratory of Big Data in Science and Technology
Zitieren
APA
Ye, X., Huang, L., Wang, J., Hu, X., Xu, J., & Zhang, C. (2026). A Lightweight PCB Defect Detection Algorithm Based on an Improved YOLOv11s. IEEE Access, 14, 56412-56426. https://doi.org/10.1109/access.2026.3678967
Vancouver
Ye X, Huang L, Wang J, Hu X, Xu J, Zhang C. A Lightweight PCB Defect Detection Algorithm Based on an Improved YOLOv11s. IEEE Access. 2026;14:56412-56426. doi:10.1109/access.2026.3678967
BibTeX
@article{Ye2026,
author = {Ye, Xuhui and Huang, Lilu and Wang, Jun and Hu, Xinyu and Xu, Jing and Zhang, Chupeng},
title = {A Lightweight PCB Defect Detection Algorithm Based on an Improved YOLOv11s},
journal = {IEEE Access},
year = {2026},
volume = {14},
pages = {56412--56426},
doi = {10.1109/access.2026.3678967}
}
EUVIMED