EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LEI Ozone Kite Aerodynamic Analysis in ANSYS

Pankaj Kumar, Yashwant Kashyap, Anil Kumar, K. Manjunatha Sharma

IEEE Access · 2026 · 14 · 46687-46699

DOI: 10.1109/access.2026.3677457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Pankaj Kumar und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kite Wind Energy Systems (KWES) are an emerging technology that harness high-altitude winds using tethered kites to generate electricity. Unlike conventional wind turbines, KWES operate in crosswind trajectories, enabling a higher power density and more consistent energy capture. However, the accurate aerodynamic characterization of Leading-Edge Inflatable (LEI) kites under realistic flow conditions remains limited. This study presents an ANSYS computational fluid dynamics (CFD) analysis to evaluate the aerodynamic performance of a $12~m^{2}$ ozone LEI kite wing under both static (zero kite velocity) and dynamic (kite velocity linearly changes) conditions. The simulation setup involved defining the computational domain, generating a high-quality mesh, and applying realistic boundary conditions to replicate the operational environment. Based on the Navier–Stokes equations (k- $\epsilon $ or SST k- $\omega $ ) with a turbulence model, the CFD model yielded lift and drag coefficients. The analysis covered a practical range of wind speeds (2–25 m/s), angles of attack 0 to 45°, Kite Area (KA) from 6 to $48~m^{2}$ , as a multiplication factor (KAMF) from 0.5 to 4 times, and the impact of the variable on the force parameters of the KWES. The results showed that lift and drag forces increased nearly linearly with the angle of attack up to approximately 30°, beyond which flow separation caused aerodynamic stall. The aerodynamic forces attained a maximum value of approximately 5 kN, with the lift-to-drag ratio reaching its peak in the angle-of-attack range of 20°–30°. Under dynamic inflow conditions, the aerodynamic efficiency decreased by approximately 13% owing to unsteady wake interactions. These findings provide valuable insights into the aerodynamic limits and optimal operating range of LEI kites, supporting the design and control optimization of KWES.

Zitieren

APA

Kumar, P., Kashyap, Y., Kumar, A., & Sharma, K. M. (2026). LEI Ozone Kite Aerodynamic Analysis in ANSYS. IEEE Access, 14, 46687-46699. https://doi.org/10.1109/access.2026.3677457

Vancouver

Kumar P, Kashyap Y, Kumar A, Sharma KM. LEI Ozone Kite Aerodynamic Analysis in ANSYS. IEEE Access. 2026;14:46687-46699. doi:10.1109/access.2026.3677457

BibTeX
@article{Kumar2026,
  author = {Kumar, Pankaj and Kashyap, Yashwant and Kumar, Anil and Sharma, K. Manjunatha},
  title = {LEI Ozone Kite Aerodynamic Analysis in ANSYS},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {46687--46699},
  doi = {10.1109/access.2026.3677457}
}
Kostenlos starten →