EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Technique for the Characterization of the X-Ray-Induced Leakage Path in a Linear Voltage Regulator

Vladimir D. Vukić

IEEE Access · 2026 · 14 · 47270-47288

DOI: 10.1109/access.2026.3676707 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Vladimir D. Vukić. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovations.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a procedure for leakage path characterization in a power integrated circuit: LM2990T-5.0. Tested devices were irradiated in two radiation environments created by a high-energy X-ray generator. The SPICE computer simulation tool and the presented technique were used to estimate experimental data on output voltage and several parameters of the parasitic metal–oxide–semiconductor (MOS) structure. The drain–source (leakage) resistance and its accompanying drain current were also estimated, as well as the threshold voltage as a function of the absorbed total ionizing dose. Simulated values of drain current, along with the calculated drain-source and gate-source voltages of the parasitic MOS field-effect transistor (MOSFET), enabled the determination of the gate-channel aspect ratio of this device. Consequently, the oxide trap density was calculated as a function of the total ionizing dose and the surface potential of the leakage path. Data on the potential across the field oxide above the leakage path and the total accumulated space charge per unit area were used to verify the acceptor impurity concentration in the semiconductor area of the leakage path. The voltage regulators examined in the 300-kVp bremsstrahlung environment failed after absorbing lower doses of ionizing radiation than those exposed to the 83-kVp photon spectrum. An analogy with a radiation-sensitive FET (RADFET) was drawn, regarding variations in the oxide-trapped charge density along the leakage path. Consequently, the ideality factor of a leakage path was defined as a measure of the influence of the radiation-induced trapped charge on such a parasitic MOS capacitor structure.

Förderung

  • Ministry of Science, Technological Development and Innovations

Zitieren

APA

Vukić, V. D. (2026). A Technique for the Characterization of the X-Ray-Induced Leakage Path in a Linear Voltage Regulator. IEEE Access, 14, 47270-47288. https://doi.org/10.1109/access.2026.3676707

Vancouver

Vukić VD. A Technique for the Characterization of the X-Ray-Induced Leakage Path in a Linear Voltage Regulator. IEEE Access. 2026;14:47270-47288. doi:10.1109/access.2026.3676707

BibTeX
@article{Vuki2026,
  author = {Vukić, Vladimir D.},
  title = {A Technique for the Characterization of the X-Ray-Induced Leakage Path in a Linear Voltage Regulator},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {47270--47288},
  doi = {10.1109/access.2026.3676707}
}
Kostenlos starten →