EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Real-Time Textile Defect Inspection System for Industrial Polyester Reinforcement Layers Based on YOLO and PLC-Driven Closed-Loop Control

Xin Wang, Yuzhuo Bi

IEEE Access · 2026 · 14 · 33873-33889

DOI: 10.1109/access.2026.3669364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Access, 2026. Verfasst von Xin Wang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manual inspection of textile fabrics remains common in industry, yet it is labor-intensive, subjective, and difficult to scale to high-speed production lines. This paper presents a real-time fabric defect inspection system for the middle reinforcement layer of high-strength industrial polyester filaments. The system integrates a YOLO-based detector with a Mitsubishi FX-series programmable logic controller (PLC) to enable closed-loop defect-triggered stopping of a rotary table or conveyor in an industrial setting. Five defect categories are considered: CL (disordered pattern), BJ (tight warp), TS (shuttle skipping), Short (short loose end), and Long (long loose end). To reduce production-specific false alarms, we propose a task-specific multi-stage post-filtering strategy for Short defects, combining an edge-based boundary constraint, class-specific confidence thresholding, and a minimum area constraint, with parameters selected on a held-out validation set and fixed for testing and deployment. The method achieves strong overall performance on the test set (precision 94.3%, recall 97.7%, mAP@0.5 98.9%, mAP@0.5:0.95 71.9%) and improves precision to 95.2% after applying the full post-filtering pipeline. We further benchmark YOLOv5s against recent lightweight variants (YOLOv8n and YOLOv8s) under the same protocol, reporting both detection metrics and PLC-integrated end-to-end latency (mean and P95) to quantify the accuracy–latency trade-off. The deployed system runs on an industrial PC (HIKROBOT MV-VC3704X-128G60) and maintains an average processing time of approximately 315 ms per frame on CPU-only inference. In on-line operation, the closed-loop system achieves an average end-to-end stop latency of about 420 ms with a low false stop rate of 0.35 per hour over 120 hours of continuous production, demonstrating robust long-term stability.

Zitieren

APA

Wang, X., & Bi, Y. (2026). A Real-Time Textile Defect Inspection System for Industrial Polyester Reinforcement Layers Based on YOLO and PLC-Driven Closed-Loop Control. IEEE Access, 14, 33873-33889. https://doi.org/10.1109/access.2026.3669364

Vancouver

Wang X, Bi Y. A Real-Time Textile Defect Inspection System for Industrial Polyester Reinforcement Layers Based on YOLO and PLC-Driven Closed-Loop Control. IEEE Access. 2026;14:33873-33889. doi:10.1109/access.2026.3669364

BibTeX
@article{Wang2026,
  author = {Wang, Xin and Bi, Yuzhuo},
  title = {A Real-Time Textile Defect Inspection System for Industrial Polyester Reinforcement Layers Based on YOLO and PLC-Driven Closed-Loop Control},
  journal = {IEEE Access},
  year = {2026},
  volume = {14},
  pages = {33873--33889},
  doi = {10.1109/access.2026.3669364}
}
Kostenlos starten →