Evaluation of Uncertainty in Partial Discharge Measurement: A Case Study
IEEE Access · 2024 · 12 · 63199-63208
DOI: 10.1109/access.2024.3395999 ↗Kurz gefasst
Fachartikel in der Zeitschrift IEEE Access, 2024. Verfasst von Asif Islam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deanship of Research Oversight and Coordination (DROC), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia.
Abstract (Originalsprache)
ISO/IEC 17025:2017 recommends all accredited laboratories under this standard, performing testing and calibration, shall identify and evaluate the contributions to the uncertainty of their measurements. This paper represents the results of the ‘measurement uncertainty’ assessment carried out on a partial discharge (PD) test set in our laboratory. The major sources of uncertainty include sampling error, calibrator inaccuracy, the resolution limit of display panels, temperature and humidity factors, etc. The uncertainty for each factor was calculated by the principles outlined in NIST-1297:1994 and JCGM-100:2008. The test PD levels were 1, 5, 10, 20, 50 and 100 pC. The combined uncertainty was calculated based on all uncertainty contributions, and the expanded uncertainties were expressed with 68%, 95% and 99% confidence level. Apparently, the measurement uncertainty was highest for the lowest test PD which decreased with the increase in PD level. The uncertainty was around 18% at 1 pC PD whereas it dropped to 2.84% at 100 pC PD. Within the whole test range of 5 to 100 pC, the maximum uncertainty was equal to 5.81%.
Förderung
- Deanship of Research Oversight and Coordination (DROC), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia
Zitieren
APA
Islam, A., Shafiullah, M., Ali, A., Alam, M. S., Hamanah, W., & Alam, R. (2024). Evaluation of Uncertainty in Partial Discharge Measurement: A Case Study. IEEE Access, 12, 63199-63208. https://doi.org/10.1109/access.2024.3395999
Vancouver
Islam A, Shafiullah M, Ali A, Alam MS, Hamanah W, Alam R. Evaluation of Uncertainty in Partial Discharge Measurement: A Case Study. IEEE Access. 2024;12:63199-63208. doi:10.1109/access.2024.3395999
BibTeX
@article{Islam2024,
author = {Islam, Asif and Shafiullah, Md and Ali, Amjad and Alam, Md Shafiul and Hamanah, Waleed and Alam, Rabiul},
title = {Evaluation of Uncertainty in Partial Discharge Measurement: A Case Study},
journal = {IEEE Access},
year = {2024},
volume = {12},
pages = {63199--63208},
doi = {10.1109/access.2024.3395999}
}
EUVIMED