EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vacuum chambers for Swiss Light Source arcs

R. Ganter, P. Braschoss, H.-H. Braun, J. Buchmann, A. Citterio, M. Dehler, N. Gaiffi, N. Kirchgeorg, M. Magjar, C. Rosenberg, D. Stephan, L. Schulz und 3 weitere

Physical Review Accelerators and Beams · 10.05.2024 · 27 (5)

DOI: 10.1103/physrevaccelbeams.27.053201 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physical Review Accelerators and Beams, online erschienen am 10.05.2024. Verfasst von R. Ganter und 14 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The vacuum chambers for diffraction limited storage ring differ from the previous storage rings generation in three main aspects: the cross-section dimension, which is divided by a factor of 2 or more to fit smaller magnet apertures; the material, which includes much more copper for heat dissipation and to limit resistive wakefields; the coating of the inner surface with a nonevaporable getter (NEG) to ensure good pumping level despite low conductance. This paper gives a detailed description of the vacuum chambers’ design used in the arc section of SLS 2.0, starting with conceptual design choices based among others on synchrotron radiation heat and wakefield considerations. The particular case of the main bending magnet vacuum chamber is explained in detail from design to manufacturing, including the development of an appropriate NEG coating procedure. Finally, the overall assembly of a 17 m long arc, its activation to reach pressure in the 10 − 11 mbar range followed by transport and installation into the magnets is presented. This validates the choice of activation for an arc vessel made out of copper, with wall thicknesses as small as 1 mm and with less than 0.5 mm clearance to magnet poles. Published by the American Physical Society 2024

Zitieren

APA

Ganter, R., Braschoss, P., Braun, H., Buchmann, J., Citterio, A., Dehler, M., Gaiffi, N., Kirchgeorg, N., Magjar, M., Rosenberg, C., Stephan, D., Schulz, L., Sieber, R., Wang, X., & Zandonella, A. (2024). Vacuum chambers for Swiss Light Source arcs. Physical Review Accelerators and Beams, 27(5). https://doi.org/10.1103/physrevaccelbeams.27.053201

Vancouver

Ganter R, Braschoss P, Braun H, Buchmann J, Citterio A, Dehler M, et al. Vacuum chambers for Swiss Light Source arcs. Physical Review Accelerators and Beams. 2024;27(5). doi:10.1103/physrevaccelbeams.27.053201

BibTeX
@article{Ganter2024,
  author = {Ganter, R. and Braschoss, P. and Braun, H.-H. and Buchmann, J. and Citterio, A. and Dehler, M. and Gaiffi, N. and Kirchgeorg, N. and Magjar, M. and Rosenberg, C. and Stephan, D. and Schulz, L. and Sieber, R. and Wang, X. and Zandonella, A.},
  title = {Vacuum chambers for Swiss Light Source arcs},
  journal = {Physical Review Accelerators and Beams},
  year = {2024},
  volume = {27},
  number = {5},
  doi = {10.1103/physrevaccelbeams.27.053201}
}
Kostenlos starten →