EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Graphite Development From a Manufacturers Perspective: Processing, Formation, and Benchmarking

Elizabeth E. Oseland, Teena S. Rajan, Michael Lain, Daniela Proprentner, Harriet Dutton, Andrew Bostwick, Paul Siddy, David Wilson, Louis F.J. Piper

PRX Energy · 07.11.2025 · 4 (4)

DOI: 10.1103/7j11-9rr5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PRX Energy, online erschienen am 07.11.2025. Verfasst von Elizabeth E. Oseland und 8 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: High Value Manufacturing Catapult, James Durrans & Sons Ltd and the University of Warwick.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Graphite remains the most widely used anode material in lithium-ion batteries, and the initial formation of the solid electrolyte interphase (SEI) largely dictates the long-term performance of commercial cells. Developing a new graphite anode to diversify the supply chain remains challenging due to proprietary formation protocols and inconsistent test formats. In this study, we evaluate a pitch-coated synthetic graphite developed by James Durrans & Sons against a commercial benchmark using a harmonized methodology across a coin, three-electrode PAT cell, and pilot line built single-layer pouch cells. By standardizing electrode morphology, formation procedures, and testing conditions, we isolate the influence of active material properties, e.g., how the first cycle loss is linked to SEI formation and how coatings and cycling conditions such as temperature can influence it. Under “like for like” comparative studies of NMC 811//graphite pouch cell, the modified synthetic graphite developed displayed higher rate performance and increased capacity retention at 1C over 200 cycles over established commercial counterparts.

Förderung

  • High Value Manufacturing Catapult
  • James Durrans & Sons Ltd and the University of Warwick

Zitieren

APA

Oseland, E. E., Rajan, T. S., Lain, M., Proprentner, D., Dutton, H., Bostwick, A., Siddy, P., Wilson, D., & Piper, L. F. (2025). Graphite Development From a Manufacturers Perspective: Processing, Formation, and Benchmarking. PRX Energy, 4(4). https://doi.org/10.1103/7j11-9rr5

Vancouver

Oseland EE, Rajan TS, Lain M, Proprentner D, Dutton H, Bostwick A, et al. Graphite Development From a Manufacturers Perspective: Processing, Formation, and Benchmarking. PRX Energy. 2025;4(4). doi:10.1103/7j11-9rr5

BibTeX
@article{Oseland2025,
  author = {Oseland, Elizabeth E. and Rajan, Teena S. and Lain, Michael and Proprentner, Daniela and Dutton, Harriet and Bostwick, Andrew and Siddy, Paul and Wilson, David and Piper, Louis F.J.},
  title = {Graphite Development From a Manufacturers Perspective: Processing, Formation, and Benchmarking},
  journal = {PRX Energy},
  year = {2025},
  volume = {4},
  number = {4},
  doi = {10.1103/7j11-9rr5}
}
Kostenlos starten →