EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Material efficiency at the component level: how much metal can we do without?

Julian M Allwood iD, Omer Music

Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · 02.12.2024 · 382 (2284)

DOI: 10.1098/rsta.2023.0245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, online erschienen am 04.11.2024. Verfasst von Julian M Allwood und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ, UK. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Global production of steel and aluminium is a major driver of greenhouse gas emissions. Various processes might allow continued primary production of the two metals, but all depend on emissions-free electricity or carbon storage, and global capacity of these two key resources will be below demand for decades to come. As a result, zero-emissions steel and aluminium will mainly come from recycling, but supply will be lower than demand. This motivates demand reduction, and for the first time, this article estimates the inefficiency in current metal use by component type. The results demonstrate that around 80% of steel and 90% of aluminium liquid metal produced today may be unnecessary. Around 40% of liquid steel and 60% of liquid aluminium are never used in final components as they are removed along the supply chain of manufacturing. Of the metal that enters final service, approximately one-third could be saved by avoiding component over-specification. A further third could be saved, where the properties of metal are not used to their limits. These results point to specific opportunities for innovation in design and manufacturing technology, of which the highest priority is to re-think the use of sheet metal in construction. This article is part of the discussion meeting issue ‘Sustainable metals: science and systems’.

Schlagwörter

Stichwörter der Autor:innen

aluminiumclimate mitigationmaterial efficiencysteel

Autor:innen und Institutionen

  • Department of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ, UK.
  • Mechanical Engineering Department, TED University, Ankara, Turkey.

ORCID-Profile: Julian M Allwood

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Allwood, J. M., & Music, O. (2024). Material efficiency at the component level: how much metal can we do without?. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 382(2284). https://doi.org/10.1098/rsta.2023.0245

Vancouver

Allwood JM, Music O. Material efficiency at the component level: how much metal can we do without?. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2024;382(2284). doi:10.1098/rsta.2023.0245

BibTeX
@article{Allwood2024,
  author = {Allwood, Julian M and Music, Omer},
  title = {Material efficiency at the component level: how much metal can we do without?},
  journal = {Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences},
  year = {2024},
  volume = {382},
  number = {2284},
  doi = {10.1098/rsta.2023.0245}
}
Kostenlos starten →