EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reuse, remanufacturing and recycling in the steel sector

C Davis iD, R Hall, S Hazra, K Debattista, S Zhuang, J Duan, Z Li, J Shenton, D Panni, A Halfpenny

Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · 02.12.2024 · 382 (2284)

DOI: 10.1098/rsta.2023.0244 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, online erschienen am 04.11.2024. Verfasst von C Davis und 9 weiteren Autor:innen. Beteiligte Einrichtung: WMG, University of Warwick , Coventry CV4 7AL, UK. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC, HVMC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The global steel sector is undergoing a transition from being a major CO 2 emitter to a more sustainable circular material service provider, moving towards (near) net zero CO 2 through combined strategies of reuse, remanufacturing, recycling and changes to primary steelmaking. This paper considers the transition using the UK as an example, based on the current sector state and future plans/opportunities. Some key enablers/barriers have been identified, and case studies are presented on the current state of knowledge and technology developments. For example, increasing reuse/remanufacturing requires data on the component’s remaining life at the end-of-product life; in this work use of in-service monitoring for steel-intensive applications in the transport sector is discussed identifying sensor types/locations for fatigue loading assessment for different use conditions to feed into material/product passports for reuse/remanufacturing decisions. Increased recycling of obsolete scrap has implications for composition control with increases in residual elements, such as Cu, Sn, Cr and Ni inevitable. Current and future approaches to recycling and scrap sorting are discussed along with case studies for how residual elements affect microstructural development during steel processing, including effects on recrystallization, phase transformation and fine-scale precipitation, which potentially could be exploited to give increases in product strength. This article is part of the discussion meeting issue ‘Sustainable metals: science and systems’.

Schlagwörter

Stichwörter der Autor:innen

recyclingremanufacturingreusesteel

Autor:innen und Institutionen

  • WMG, University of Warwick , Coventry CV4 7AL, UK.
  • School of Engineering, Newcastle University , Newcastle upon Tyne NE1 7RU, UK.
  • JCB , Rocester, Staffordshire ST14 5JP, UK.
  • Hottinger Bruel & Kjaer UK Ltd., Advanced Manufacturing Park Technology Centre, Brunel Way, Catcliffe , Rotherham, South Yorkshire S60 5WG, UK.

ORCID-Profile: C Davis

Förderung

  • EPSRC
  • HVMC

Zitieren

APA

Davis, C., Hall, R., Hazra, S., Debattista, K., Zhuang, S., Duan, J., Li, Z., Shenton, J., Panni, D., & Halfpenny, A. (2024). Reuse, remanufacturing and recycling in the steel sector. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 382(2284). https://doi.org/10.1098/rsta.2023.0244

Vancouver

Davis C, Hall R, Hazra S, Debattista K, Zhuang S, Duan J, et al. Reuse, remanufacturing and recycling in the steel sector. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2024;382(2284). doi:10.1098/rsta.2023.0244

BibTeX
@article{Davis2024,
  author = {Davis, C and Hall, R and Hazra, S and Debattista, K and Zhuang, S and Duan, J and Li, Z and Shenton, J and Panni, D and Halfpenny, A},
  title = {Reuse, remanufacturing and recycling in the steel sector},
  journal = {Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences},
  year = {2024},
  volume = {382},
  number = {2284},
  doi = {10.1098/rsta.2023.0244}
}
Kostenlos starten →