Micro-poromechanical friction-damage modelling of saturated quasi-brittle materials incorporating dominant microcracking
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · 2025-06 · 481 (2315)
DOI: 10.1098/rspa.2025.0001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, online erschienen am 04.06.2025. Verfasst von Linghui Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 97 Literaturangaben. Gefördert von: Guangdong Provincial Key Laboratory of Modern Civil Engineering Technology, South China University of Technology, Science and Technology Projects in Guangzhou, Zhejiang Provincial Water Conservancy Science and Technology Plan Project.
Abstract (Originalsprache)
This work proposes a subtly micro-poromechanical friction-damage model to characterize the anisotropic mechanical behaviour of saturated quasi-brittle materials under compression. The primary characteristic is that stress-induced anisotropy depends solely on the propagation and sliding of microcracks with the most unstable orientation under a given load, referred to as dominant microcracks, rather than microcracks in all orientations. Accordingly, representative element volume (REV) herein contains elastic porous solid and dominant microcracks. In the framework of poromechanics and with the Mori–Tanaka homogenization procedure, a local effective stress-based damage-dependent friction law is introduced, with a non-associated flow rule to describe the plastic deformation. To capture the damage evolution, an energy release rate-based damage law is selected. By critical plane analysis, the direction of dominant microcracks is identified from Mohr’s maximization postulate. Following this, the drained triaxial compressive strength criterion is derived under friction-damage coupling analysis, and the numerical integration of the model is conducted by developing an extended semi-implicit return mapping (ESRM) algorithm with an adaptive substepping technique. Finally, we validate the effectiveness of the proposed model through comparisons between numerical results and experimental data of typical saturated rocks under drained and undrained conditions, while the robustness of ESRM algorithm is also evaluated.
Förderung
- Guangdong Provincial Key Laboratory of Modern Civil Engineering Technology, South China University of Technology
- Science and Technology Projects in Guangzhou
- Zhejiang Provincial Water Conservancy Science and Technology Plan Project
- National Natural Science Foundation of China
Zitieren
APA
Liu, L., Lai, Y., Lv, Z., Qin, Z., & Zhao, L. (2025). Micro-poromechanical friction-damage modelling of saturated quasi-brittle materials incorporating dominant microcracking. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 481(2315). https://doi.org/10.1098/rspa.2025.0001
Vancouver
Liu L, Lai Y, Lv Z, Qin Z, Zhao L. Micro-poromechanical friction-damage modelling of saturated quasi-brittle materials incorporating dominant microcracking. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2025;481(2315). doi:10.1098/rspa.2025.0001
BibTeX
@article{Liu2025,
author = {Liu, Linghui and Lai, Yuanming and Lv, Zhaomin and Qin, Zipeng and Zhao, Lunyang},
title = {Micro-poromechanical friction-damage modelling of saturated quasi-brittle materials incorporating dominant microcracking},
journal = {Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences},
year = {2025},
volume = {481},
number = {2315},
doi = {10.1098/rspa.2025.0001}
}
EUVIMED